Graphic LCD 128x64 pixels with LED backlight. LCD-PG-128064D-DIW W/KK E6

A module with a high precision temperature sensor based on the STS35 system. It allows measurement with an accuracy of ±0.1° C and communicates via the I2C interface. DFRobot SEN0434

TFT 2.4 "display module with SD, 240x320, touch panel, ILI9341, RoHS

Single-mode Bluetooth low energy module featuring smartBASIC, Lairdtech, RoHS

Spring-loaded test needle for connecting and testing modules without soldering

LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116

Radio module with operating frequency of 433 MHz. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.3 to 5 V. DFRobot TEL0114

Analog pH Meter Pro (SEN0169)

Module with GPS PA1616D receiver based on the MTK3333 system. It is equipped with a USB type C connector and a USB-UART converter. Adafruit 4279

Kinetis L Series Cortex-M0+, 32bit MCU, 16kB Flash, LQFP48, Freescale, RoHS

Module with a radio receiver operating at 315 MHz for Arduino. DFRobot TEL0075

Module with 9 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4309

Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4345

Power module with a USB Type-C connector based on the STUSB4500 system. It enables powering devices with voltages ranging from 5 V to 20 V and currents up to 5 A. Configuration via the I2C interface. SparkFun DEV-15801

Camera with OV4689 CMOS sensor with a resolution of 2688x1520 px. It communicates via a parallel interface. ArduCAM U6035

The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847

Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 77°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0190

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605

BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484