SEN-14520

Module with a reflection sensor (line sensor) RS-06WD. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020172

7" LCD display with capacitive touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. It has a resolution of 1024x600 pixels. DFRobot DFR0506

Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0150-B

Module with a matrix LED RGB 6x12 display (72 LEDs) designed to work with Feather plates. It communicates via a two-wire SPI interface. Adafruit 3449

LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. It has a built-in USB and UART interface. GM73

Single-channel audio amplifier up to 100 W.

An expansion module for the Wio Terminal development board, which features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS network communication. It allows the construction of compact IoT projects. Seeed Studio 114992728

Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018

Analog audio level indicator in the form of a panel meter. Powered with AC or DC voltage from 6 to 12 V, it has a built-in green backlight

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

Digital mono audio amplifier based on the HXJ8002 chip. It has one channel with a power of 3 W and can work with speakers from 2 to 8 Ω. It is powered with the voltage from 2 V to 5.5 V

Module with an IR transmitter operating at a frequency of 38kHz. The module is supplied with the voltage from 3 to 5V. FRobot DFR0095

Module with blue LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-B

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R

Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-W

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025