Single-core, multi-strand wire in white silicone insulation. 18AWG thickness, 4m length

USB-UART converter based on the CP2102N chip. Compatible with a voltage of 3.3 V, it has been equipped with a USB type C connector. Adafruit 5335

The module is equipped with a LCD TFT display with a diagonal of 0.96" and a resolution of 160x80 px, controlled by the PIXXI-28 graphic controller. SparkFun LCD-19251

Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895

3-channel constant current LED driver module, RoHS

The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642

The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4,5x3mm DC plug used in HP laptops. Length 1.8 m

The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589

Conductive ITO coated glass. It has dimensions of 100x100 mm, a thickness of 1.1 mm and a resistance of 10 Ω/inch2

Soil moisture sensor with I2C interface. The probe has two pointed tabs, making it easy to insert into the ground. The sensor is supplied with the voltage of 3.3 V or 5 V. SparkFun SEN-17731

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

LED strip with COB diodes in white (warm). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

Spring-loaded test needle for connecting and testing modules without soldering

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-R

8-channel IO expander with 6 analog inputs. It communicates via the USB interface. Version without Pull-Up resistors. Numato Lab GP80001

Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816

1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. Waveshare OV9281-120 Camera

Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231

Module with the ATECC608A cryptographic chip. It allows you to add strong security to an IoT node, edge device, or embedded system. SparkFun DEV-18077