The compact KY-003 Hall sensor module is capable of detecting magnetic fields, making it ideal for measuring rotational speeds and for automation and robotics applications.

A set of two 35mm crocodile clips (terminals) with a black and red cover.

ARM968E-S, 512kB Flash, 48KB SRAM, 2xCAN, 2xLIN, 2xUART, 3xSPI, ADC, LQFP144, NXP, RoHS

MS-DIP/SO10 PCB, SO8-SO16L to DIP8-DIP16 adapter

Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK

Bluetooth 4.2 audio receiver with 5W stereo amplifier per channel. It allows you to play files via Bluetooth interface and supports WAV, APE, MP3 and FLAC formats. MH-M38

A set of elements that allow you to create fascinating projects, both simple and more advanced. The set includes, among others contact plate, wires, passive elements or the well-known NE555 timer system

51-pin FPC/FFC connector adapter, 0.3 mm pitch to DIP holes, 2.54 mm and 2.0 mm pitch

20-wire 1m IDC F/F cable

The cable is terminated on both sides with a 1.25mm-7P plug. Length 30cm

Camera with a global shutter designed for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI slot. The camera is equipped with a Sony IMX296 sensor with a resolution of 1.5 MPx and a built-in IR filter. Raspberry Pi Global Shutter Camera

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0200-B

STM32L562CET6, Ultra-low-power microcontroller Arm Cortex-M33 with Trust Zone, 110 MHz, 512 kB Flash, LQFP48

LDL112D33R is a precision LDO regulator with a 3.3 V output voltage and current capability up to 1.2 A, designed for high energy efficiency applications. Its low dropout voltage and quiescent current make it an ideal solution for modern digital systems powered by batteries or requiring stable voltage under dynamic load conditions.

The Finder 46.61.9.024.0074 relay is a high power DPDT relay, designed to operate with a coil voltage of 24VDC, handling loads up to 16A at 250VAC. Its robust construction and voltage resistance up to 6kV ensure reliability and safety in industrial applications such as automation and control systems.

LDL112PV10R is a high-performance LDO regulator with a fixed 1 V output and load capability up to 1.2 A, designed to power modern digital circuits in low-voltage applications. Its compact DFN‑6 package and high energy efficiency make it an ideal choice for miniaturized embedded devices and industrial control systems.

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Orange color

Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05

The 13.56 MHz RFID reader module in a set with a keyring and RFID card