A module with line sensors designed to work with the Kitronik kit. It has two sensors in the form of phototransistors that generate an analog voltage that can be read by the microcontroller. The module is equipped with a 4-pin connector (3V, 0V, L, R), which allows for power supply and reception of signals from the sensors, and the output voltage changes depending on the detected surface, which allows it to be used not only with the Kitronik kit, but also with platforms such as Arduino or Raspberry Pi Pico. Kitronik 56111

The single-mode (SM) fiber optic patchcord with LC connector in a duplex configuration is a high-quality cable designed for fast and reliable data transmission in fiber optic networks. Made with G657A1 fiber and featuring an LSZH jacket, it ensures low attenuation and high bending resistance, making it ideal for telecommunications, data centers, and other professional network installations. FO-LULU-SD11-0100-YE

USB-TO-TTL-FT232 is a reliable USB-to-UART converter designed for applications requiring a compact module with safe and fast serial communication. It is well-suited for microcontroller programming, UART port diagnostics, and powering devices in embedded systems. With high system compatibility and full logic-level isolation, it is an ideal tool for electronics designers and system integrators.

Access line ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, ADC, LQFP48, RoHS

Finder 62.82.8.230.4300 is a 2P 16 A power relay with a 230 V AC coil and Z-type contacts. Intended for industrial automation applications, it offers high reliability, durability and operational safety thanks to the increased contact gap and 6 kV insulation.

Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle

JACK plug 3.5, stereo, metal.

Module with an active buzzer. The board is equipped with an XH2.54 connector and is controlled by a digital signal

Temperature and humidity sensor adapted to work with Sonoff TH10 / TH16

Yellow LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel

Sunon MEC0252V1-000U-A99 is a high-performance 24 V DC axial fan with a Vapo bearing and auto-restart function. It provides an airflow of 183.9 m³/h at a speed of 3100 rpm, making it an ideal solution for cooling industrial and electronic devices that require reliable ventilation.

The 2.1x5.5mm DC Power Jack female plug is a reliable 90-degree power connector, perfect for use in monitoring systems and LED lighting. ADP0036

Single-channel SuperSpeed USB 3.0 driver from NXP in the X2QFN12 housing. The 1.8V system supports data rates up to 5 Gbit / s. NXP PTN36221AHXHP

OLED display with a diagonal of 0.49" and a resolution of 64x32 pixels. Displays content in white. Uses the SSD1315 controller and communicates via the I2C bus. Waveshare 0.49inch OLED Module

HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 1,8m cable length. LANBERG z27510

OV5640 camera module equipped with a 5 MP sensor and a lens with a wide viewing angle of 72 degrees with autofocus. It is perfect for applications related to security systems and monitoring, but also in robotics. Adafruit 5840

Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579