Akyga AK-AD-40 adapter enables convenient and aesthetic connection of an HDMI cable at a 90° angle, which is especially useful for devices with hard-to-reach ports. Support for the HDMI 1.4 standard ensures compatibility with high resolutions, including 4K, while gold-plated connectors guarantee transmission stability. The adapter is used in home installations and professional audio-video systems, increasing the functionality and aesthetics of cable connections.

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 12 V and a maximum input of up to 2 A. Pololu 4945

Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038

Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)

The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.

Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with auto focus and flash LED, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (C)

Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor

Single-core, multi-strand wire in green silicone insulation. Thickness 20AWG, length 4m

The QFN8 adapter is a universal design equipped with two QFN8 sockets for 6x5mm and 8x6mm ICs marked QFN8, MLF8, MLP8, WSON8, DFN8.

Adapter with two D-SUB 15-pin female ends, allowing you to change the VGA cable end from male to female or connect two male VGA cables. Finished aesthetically in silver with yellow accents, has nickel-plated plugs and is adapted to work in the temperature range of 5-50 ° C. Akyga AK-AD-18

The USB Step-Up 12V 6W converter module converts the input voltage in the range of 4.2-5.2V to a constant output voltage of 12V, with a maximum current of 0.5A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.

Pololu High-Power Motor Driver 36v20 CS

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716

A ruler with marked solder pads for the most commonly used housings of electronic components. Equipped with a template for the width of paths and holes in accordance with the AWG conductor cross-sections. It facilitates the design of electronics. DFRobot DWG0014-M

BOB-11044 OSHWTPA2005D1 class D audio amplifier module. The chip can work with a loudspeaker up to 1.4 W and 8 Ohm. SparkFun BOB-1104

Universal loudspeaker with a power of 20 W and a resistance of 8 Ω. It has a diameter of 105 mm

The audio adapter with a 15-cm cable allows you to connect headphones with two 3.5 mm plugs to devices with one jack socket. This makes it possible to use traditional headsets with modern devices. Akyga AK-AV-08

Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036