This Ethernet module allows you to easily add a wired connection to projects with 3V or 5V microcontrollers. It communicates via SPI and supports automatic DHCP setup, while the LINK and ACTIVITY LEDs indicate connection status. The module works with the Arduino Ethernet and CircuitPython libraries for easy integration into IoT projects. Adafruit 6348

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

Programmable radio module operating at 2.4 GHz. It is based on the CC2511F32 microcontroller. The board has analog outputs, PWM, USART and SPI interfaces and a USB connector. Pololu 1336

2x16 LCD Module (No Backlight)

A simple and practical soil moisture sensor designed to work with the BBC micro:bit. Using conductive probes inserted into the ground, the module measures moisture levels and generates an analog signal read by the micro:bit. Powered by 3V, it ensures easy and reliable integration, and when combined with the Mi:Power board, it can also trigger an audible alarm when the soil is dry. Kitronik 5647

Compact light sensor that provides precise measurement of both illuminance (10–10000 Lux) and correlated color temperature (2700K–6500K), with low measurement errors. Thanks to I2C and UART interfaces, the sensor easily integrates with platforms such as Arduino or Raspberry Pi, making it an ideal tool for photographers, filmmakers and projects requiring lighting control. DFRobot SEN0611

Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829

Camera module with OV5640 sensor with a resolution of 5 MP. It communicates via the SCCB interface. Waveshare OV5640 Camera Board (A)

White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)

Pololu 5650 is a JST PH and SH 2-pin connector adapter designed for integration with prototyping boards and modules with a 2.54 mm pitch. It allows conversion between JST PH and SH standards and enables quick wire connections in power and communication projects.

Pololu High-Power Motor Driver 36v20 CS

Plastic housing designed for ePaper displays with a diagonal of 7.5". Mounted with a magnet, has a cutout for a microUSB connector. Waveshare 7.5inch e-Paper Case

Module with acceleration and rotational speed sensor based on the MPU-6050 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 3886

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

DC motor driver that allows you to control the movement of three drives using the I2C interface. Pololu 5035

El-wire is a thin and flexible wire which shines under high voltage. The cable is red, has a diameter of 3mm and a length of 3 meters

Yellow LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Air quality sensor module PMSA003I. It allows for a precise analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. Adafruit 4632