TSV731ICT, High accuracy (200 μV) micropower 60 μA, 900 kHz 5 V CMOS operational amplifiers, SC-70-5

This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5085

USB cable with a 2-pin magnetic connector in a set with a female socket. It has a 2.8 mm pitch, allows you to power devices with a current of 2 A

DC motor driver based on the Texas Instruments DRV8263H-Q1. It can control one DC motor in two directions or two motors in one direction from a supply voltage of 4.5-65V and a continuous current of up to 3.5A (limited to 10A). The module offers three control modes: Phase/Enable (PH/EN), PWM (IN/IN), and independent half-bridges. Built-in current sensors and protection features protect against overload, overheating, and reverse power connection. The 3-5V logic control is decoupled from the motor supply, increasing safety and integration flexibility. Pololu 5238

Isolated DC-DC power module designed for safe powering of sensitive electronic circuits, offering galvanic isolation up to 3kVRMS, 5V or 5.5V output voltage, and output current up to 300mA. Pololu 5414

Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791

Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera

Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579

A module with a temperature and humidity sensor based on the AHT20 system. It communicates via the I2C interface. DFRobot SEN0527

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4x1,7mm DC plug used in Lenovo laptops. Length 1.8 m

Unmanaged Lanberg DSP1‑1005 Network Switch with 5 1000BASE‑T Ports, supporting automatic MDI/MDIX, Flow Control, and IEEE 802.3, 802.3u, 802.3ab standards. Desktop model, passive cooling, LED indicators

Step-Up/Step-Down converter module based on the S13V15F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2 A. Pololu 4084

The DIN Half B type connector is a male, right-angle half connector with 2x32 contacts, designed for use in electronic devices. It ensures reliable signal connections in compact spaces.

IPS 11.6" LCD display with touch screen. Equipped with HDMI interface for image display and USB to touch panel. Resolution 1920x1080 pixels. Waveshare 11.6inch HDMI LCD (H) (for EU)

I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248

A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091

IoT DFRobot Gravity UART OBLOQ module for working with Microsoft Azure. DFRobot TEL0118