Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera

Module with 25 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4125

IPS 3.5" LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch panel. Resolution 640x480 pixels. Waveshare 3.5inch DPI LCD

Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244

ARM Cortex-M3 MCU, 512 kB Flash, 96 kB SRAM, USB Device/Host/OTG, Ethernet, EMC, TFBGA208, NXP, RoHS

Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295

STEMMA QT/Qwiic cable (adapter) for Grove 100 mm long. It enables interoperability between the I2C SparkFun Qwiic and Adafruit STEMMA QT-based system and Seeed Studio\'s Grove boards. Adafruit 4528

A set of converters (transmitter and receiver) HDMI-RJ45 allowing the transmission of HDMI signal up to a distance of 60 m

Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231

MEMS SPU0414HR5H-SB analog microphone module. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020852

GOODRAM CX400 gen. 2 SSD with a capacity of 256 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-256-G2

Ethernet network cable UTP Cat6 unshielded patchcord, 2 m long, white, with 2xRJ45 connectors. Lanberg PCU6-10CC-0200-S

The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008

Ethernet network cable UTP Cat6 unshielded patchcord, 1 m long, gray, with 2xRJ45 connectors. Lanberg PCU6-10CC-0200-S

Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011

12-bit DAC converter module designed to work with the M5Stack sets. It enables the conversion of digital signals into an analog signal. M5Stack DAC Unit

The protection circuit for one Li-Ion cell with a voltage of 3.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 12 A

Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021