Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052

DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016

A 2x20 LCD display with yellow-green LED backlight and an HD44780 controller designed for a wide temperature range, from -20°C to +70°C. It is suitable for industrial applications, automation, control systems, and educational projects, ensuring clear text presentation in demanding conditions

8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180

DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015

Cable with USB type A and USB type C 2.0 plugs, cable length 1 m

Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587

Module with two GC0328 cameras designed to work with Sipeed MAix kits. The set has been designed for AI and stereo vision applications. Seeed Studio 114991702

Two-channel driver for DC motors with an operating voltage from 7 to 35 V and a continuous current up to 10 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS10

Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212

A ruler with marked solder pads for the most commonly used housings of electronic components. Equipped with a template for the width of paths and holes in accordance with the AWG conductor cross-sections. It facilitates the design of electronics. DFRobot DWG0014-M

AT93C46-10SU-2.7, Three-wire Serial EEPROM 1K, SOIC-8

3.5 "TFT display with touch panel, stylus, 3 heat sinks and HDMI converter for Raspberry Pi 3B, 3B+ and 2B. ArduCAM B010601

ToF distance sensor (Time of flight) with a range of up to 60 cm. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0429

External case designed to protect, transfer and store data on M.2 SSD drives with PCI-E (NVMe) interface. Equipped with a USB 3.1 interface with a C type connector. Orico M2PV-C3

Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054

DC-DC Step Down converter module with input voltage from 7 to 24 V and output voltage of 5 V. Can supply currents up to 4 A. DFRobot DFR0831

Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007

Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020024

Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron