AVR, 16kB Flash, 1kB RAM, 512B EEPROM, DIP40, RoHS

WRL-13019

WRL-12847

SEN-12829

WRL-12991

Pololu 4816 is a set of two JST SH 5-pin top-entry adapters that enable integration of JST SH wires with breadboards and prototype boards. With support for voltages up to 50 V and currents up to 1 A per pin, the adapters are suitable for many prototyping, communication, and power applications.

Pololu 4815 is a set of two JST SH 4-pin side-entry adapters that allow connecting JST SH wires to breadboards and prototype boards. Thanks to the side-entry wire insertion, these adapters are particularly useful in projects with limited space and where organized cable routing is important.

 Pololu 2831

Pololu 2450

DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982

Module with a stepper motor driver based on the DRV8825 system. allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage up to 45 V. Pololu 2987

Female terminal block, 4-pin. Pitch 3.81mm. Height 11.1mm. 15EDGK-3.81-4P. Set of 5 pieces

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443

The Lanberg AC1200 mini USB 3.0 wireless card offers high performance and stability in the 802.a/b/g/n/ac standards, operates at 2.4 GHz and 5 GHz frequencies, providing speeds several times higher than the N standard, lower noise and compatibility with the latest routers and access points; It\'s perfect for online gaming, 4K streaming and more, thanks to its compact design and internal antennas.

Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16

Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12

Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021

LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853