Category: LED - diodes, displays, stripes
Subcategories
There are 441 products.
RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721
32 x 64 RGB LED display module (2048 LEDs). Refresh rate 1:16. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun COM-14718
Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24
Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16
Module with 24 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020168
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
Light-emitting diode (LED) with a viewing angle of 120 ° and luminosity of 60 mcd. The maximum current of the diode is Imax = 20mA (1.9V), and the wavelength is 637nm (red). LED ALS-1206R-opto-00060-120
Beam is a beginner-friendly PCB with 120 LEDs arranged in a 5x24 grid, a great size to display text or animations in your project. Plug in one to four to create a long blinky display that can be controlled by any 3-5V microcontroller or microcomputer (e.g. Arduino, Raspberry Pi, Particle, and more). Adafruit 3668
Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376
Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W
5 mW red laser diode module displaying a point. It uses the PWM signal for control. It can be supplied with the voltage from 4.8 V to 5.2 V. Adafruit 1056
A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776
8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522
A small module - an infrared emitter (LED IR). The diode emits infrared light with a wavelength of 940 nm. With the help of the module, it is possible to transmit commands or signals that can be received by an infrared receiver. The transmission range is up to 10 meters. Seeed studio 101020026
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
Module with blue LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-B
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
LED 5 mm two-color angle 40 degrees common cathode, RED - luminous 1200 mcd (20mA) (2.0V); df 635 nm, Pure Green - light intensity 1200 mcd (20mA) (2.1V); df 519 nm