.png)
- New
TCS34303 CIE XYZ Ambient Color Sensor I2C - Adafruit 6479
ID: 1210183
zł50.91
Tax included
zł41.39 tax excl.
TCS34303 ambient color sensor breakout providing CIE XYZ and infrared measurements through four optical channels. It communicates over I2C, supports 3.3V and 5V logic and includes STEMMA QT / Qwiic connectors. Adafruit 6479
Description
The color sensor breakout Adafruit TCS3430 / TCS34303 uses the TCS34303 device to measure light using channels corresponding to CIE XYZ components together with an infrared channel. Unlike conventional RGB sensors, the device provides raw measurements from channels designed for color-space analysis, making it suitable for systems that use application-specific calibration.
The sensor uses optical channels centered at approximately 437nm for X1, 574nm for X2, 537nm for Y and 434nm for Z. The output consists of raw measurement values, so accurate color representation requires calibration against a reference color analyzer or known light source. The module can be used for color sensing, illumination monitoring, light-source analysis and projects using custom XYZ conversion algorithms.
Communication is provided through the I2C interface. The Adafruit breakout includes support circuitry for operation with both 3.3V and 5V logic systems. Two STEMMA QT / Qwiic connectors allow solderless connection and easy integration into an existing I2C bus.
Arduino and CircuitPython/Python libraries are available for reading XYZ and IR measurement data. The module is intended primarily for applications requiring raw sensor data rather than directly calculated CIE coordinates or lux values.
Features
- Device: TCS34303
- Family designation: TCS3430 / TCS34303
- Type: ambient light and color sensor
- Measurement model: CIE XYZ + IR
- Optical channels
- X1: approximately 437nm
- X2: approximately 574nm
- Y: approximately 537nm
- Z: approximately 434nm
- Infrared channel
- Output data: raw measurement values
- Communication interface: I2C
- Logic levels: 3.3V / 5V
- Connectors: STEMMA QT / Qwiic
- Supported environments: Arduino, CircuitPython/Python
- Manufacturer: Adafruit
- Product ID: 6479
1210183
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)
zł43.33
24h
Available quantity: 2
Available
Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980
zł39.47
24h
Available quantity: 1
Available
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
zł25.87
24h
Available quantity: 15
Available
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
zł34.96
24h
Available quantity: 3
Available
Module with a 10-channel AS7341 sensor that detects light in various wavelength ranges (color detection). It communicates via the I2C interface. Adafruit 4698
zł97.12
24h
Available quantity: 4
Available
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
zł27.83
24h
Available quantity: 54
Available
A module with a light sensor in the form of a photoresistor. There is a comparator and a potentiometer on the board. The module has a digital output
zł4.92
24h
Available quantity: 29
Available
Module with an analog TEMT6000 light intensity sensor. The output voltage increases with the intensity of the incident light. The sensor is powered with the voltage of 5 V
zł6.86
24h
Available quantity: 19
Available
Module with digital light intensity sensor MAX44009. It is supplied with the voltage from 1.7 to 3.6 V and communicates via the I2C interface. GY-49
zł98.06
24h
Available quantity: 2
Available
Module with analogue UV light sensor ML8511. It enables the measurement of the radiation intensity for the UV-A (320-400nm) and UV-B (280-320nm) waves. It has an analog interface. GY8511
zł125.12
4 weeks
No product available!
Module with color sensor TCS3472. The board is equipped with a Grove connector and communicates via the I2C interface. M5Stack U009
zł62.08
24h
Available quantity: 1
Available
Color sensor with a range from 8 to 16 mm. It offers 3 operating modes and can be powered with the voltage from 12 to 24 V. DFRobot SEN0506
zł225.34
24h
Available quantity: 1
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
Regular pricezł208.80zł177.71
24h
Available quantity: 3
Available
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
zł123.16
24h
Available quantity: 1
Available
Module with light sensor VEML7700. It allows you to measure the intensity in the range from 0 to 120 Klx. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5378
zł24.83
24h
Available quantity: 31
Available
Module with a light intensity sensor BH1750FVI dedicated to the M5StickC sets. It communicates via the I2C interface. M5Stack U134
zł27.90
1 weeks
No product available!
TCS34303 ambient color sensor breakout providing CIE XYZ and infrared measurements through four optical channels. It communicates over I2C, supports 3.3V and 5V logic and includes STEMMA QT / Qwiic connectors. Adafruit 6479