LTE CAT-1 HAT-format communication module with the SimCom A7670E-LASE modem, designed for Raspberry Pi, enabling wireless data transmission in LTE and GSM networks with support for Internet protocols and AT command control. KAmod LTE CAT1

LTE CAT-1 HAT communication module with integrated GNSS receiver, based on the SimCom A7670E-FASE modem, designed for Raspberry Pi. Enables data transmission in LTE and GSM networks and precise GPS positioning in IoT and industrial applications. KAmod LTE CAT1-GNSS

Prototyping board with a 2.54 mm pitch, designed for use with Raspberry Pi Pico, featuring three solderable hole areas and a complete set of 20-pin female and male connectors. KAmodRPI Pico Protoboard

The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889

The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428

KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.

Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps

The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT

Official camera module set to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Raspberry Pi SC0872

5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.

The Raspberry Pi Cooler is an essential accessory for anyone who wants to ensure optimal operating conditions for the Raspberry Pi Compute Module 5. Efficient passive cooling effectively reduces the operating temperature of the module, which is crucial for ensuring reliability and long-term stability of the system. With this heatsink, users can fully utilize the capabilities of their Raspberry Pi Compute Module 5 without worrying about overheating and the associated reduction in performance

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero

Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166

MicroHDMI - HDMI cable in white color, 2 m long. Intended for use with Raspberry Pi 4 model B and Raspberry Pi 5

3in1 case designed for Raspberry Pi Zero 2. The set includes three top panels - full, with a cutout for a 40-pin GPIO connector and with hole for the camera. Made of plastic. The housing has non-slip feet

Aluminium Heat Sink for (2 pcs set) for Raspberry Pi 2/+ and Pi 3 with self-adhesive sticker

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040

The Raspberry Pi USB-C 45W Power Supply is a high-performance power source designed to work with the Raspberry Pi 5 and other devices compatible with the USB Power Delivery standard. Thanks to the dynamic selection of the voltage-current profile and the maximum power of 45 W, it allows for stable power supply for both single-board computers and external drives and mobile devices. It works well as a universal power solution in the workshop and educational environment

HDMI adapter that allows you to connect displays with an HDMI connector to the Raspberry Pi minicomputer, without using a cable