Category: Power modules

The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.

Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 600 mA) connected to the USB socket. There is a diode on the board indicating the power connection. modPS

Step-Down XL4005 converter module with adjustable output voltage in the range from 0.8 to 30 V with a wide input voltage range from 4.5 to 30 V and a maximum output current of 5 A

Step-Down RT8272 converter with adjustable output voltage in the range from 5 V to 12 V, input voltage from 5 to 24 V and a maximum output current of 3 A

Step-Up converter with adjustable output voltage from 5 to 40 V, input voltage from 3 to 35 V and a maximum current of 5 A

The power supply module with the LiPo battery charging circuit, designed for the Wemos D1 Mini boards

The Step-Down converter module converts the input voltage of 14 - 26 V to a constant 12 V, with a maximum output current of 3 A, recommended up to 0.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

The Step-Up converter module converts the voltage in the range of 3-35V to 5-40V with a power of 40-60W and an efficiency of over 90%. Works stably at temperatures from -40 to 85°C.

Safety system for two Li-Ion cells with 7.4V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 5A. modBMS5A

Step-Down converter with an output voltage of 5 V, an input voltage of 6.5 to 16 V and a maximum current of 4 A

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 15V. PDC004

Step Down converter module with an output voltage from 5 to 12 V and a maximum load of 3.4 A. The board is equipped with two USB connectors and has a built-in fast charging function for smartphones

The Step-Up/Step-DownS10V4F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 2.5-18V and a maximum output current of 400mA. Pololu 2121

Step-Up converter with an output voltage of 5 V, an input voltage of 0.9 to 5 V and a maximum current of 0.48 A

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 9 V or 12 V and testing chargers. PDC005

BMS module for six Li-Ion cells with a voltage of 22.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 14 A

The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.

Step-Down converter with an output voltage of 5 V, input voltage from 4.5 to 40 V and a maximum current of 2 A. The board is equipped with a segment LED display and a USB output

The Step-Down converter module on the XL7015 chip converts the voltage in the range of 5-80V to 5-20V, with a maximum current of 0.8A and a recommended output power of 7W. It has protection against overheating, short circuit and current overload, and its board size is 16 x 44 mm.

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.