Category: Main categories

Module with NEO-F9P GNSS receiver. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo and Beidou, and offers accuracy of up to 10 mm using an RTK base station. It offers five communication ports: USB type C, UART1, UART2 for RTCM, I2C and SPI reception and Qwiic connectors. SparkFun GPS-23288

GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 300 MHz frequency band and the ability to measure voltages up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP703

Advanced signal generator. It has two independent signal channels. It offers a sampling rate of 300 MSa/s and allows the generation of signals at various frequencies in the range of up to 15 MHz. Hantek HDG3012B

Minisumo robot on a tracked chassis with Pololu motors with a 75:1 HP gearbox. The robot is fully assembled and requires four additional AA batteries. Pololu 5012

Acceleration measurement module with ADXL335 3-axis analog accelerometer system. The module is supplied with the voltage from 1.8 to 3.6 V. SparkFun SEN-09269

Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01

GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-21305

Development board with GW1NSR-LV4C FPGA. Offers access to 4608 LUT4 logic cells. It has a built-in JTAG debugger. The user has LED diodes and user buttons at their disposal. In addition, the board provides a camera connector and an HDMI connector. Sipeed Tang Nano 4K

Development board with GW1NSR-LV4C FPGA. Offers access to 4608 LUT4 logic cells. It has a built-in JTAG debugger. The board provides a camera connector and an HDMI connector. Included with the OV2640 camera. Sipeed Tang Nano 4K Kit

Development board with the GW1NR-9 FPGA system. Offers access to 8640 LUT4 logic cells. It has a built-in BL702 debugger, which also serves as a USB-UART converter. The user has LED diodes, user buttons and a microSD card slot at their disposal. In addition, the board provides a 40-pin display connector and an HDMI connector. Sipeed Tang Nano 9K

Development board with GW2AR-18 QN88 FPGA. It offers access to 20736 LUT4 logic cells and 15552 Filp-Flops. It has a built-in BL616 debugger, which also serves as a USB-UART and USB-SPI converter. The user has at their disposal LEDs, RGB LEDs, user buttons and a microSD card slot. Sipeed Tang Nano 20K

A complete kit for creating retro game emulators and FPGA-based projects, equipped with advanced features and an intuitive IDE

UART-RS485 converter module, based on a halfduplex SP3485 transceiver. SparkFun BOB-10124

SLS22-xHM computing module with Renesas RZ/V2L processor (2 Cortex-A5 + Cortex-M33 cores), 1GB RAM (DDR4) and 8 GB eMMC memory, intended for use as a computing subsystem in the PHM/SHM xHMAnalyzerMAX analyzer

An OEM version of the measurement system for PHM/SHM applications, creating a complete, autonomous measurement system node, equipped with a network interface. The system consists of a base board and a computing module. The measurement front-end of the base plate is equipped with AI/ML that serves as a configurable sample preselector.

The design is optimized for cooperation with computing modules based on Renesas RZ/V2L processors

A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386

Active GNSS antenna u-blox ANN-MB1 multi-band dedicated to precise location determination. It offers support for the L1, L5, E5a, B2a and NavIC bands and is equipped with a 5-meter antenna cable with an SMA connector. SparkFun GPS-23814

Zumo 2040 robot main control board. It is included as part of the Zumo 2040 robot kit and built into assembled versions of Zumo 2040 robots. Through-hole components, magnetic encoder disks and mounting hardware are included. Pololu 5014

Compact helical antenna designed to receive GNSS/GPS signals in the L1, L2 and L5 bands. It is compatible with GPS, GLONASS, Galileo and BeiDou systems and is ideal for mobile and aviation applications. SparkFun GPS-23847