Category: Main categories

Kit with IPS 13.3" LCD display dedicated to Raspberry Pi CM4 modules. It allows you to build a portable minicomputer. Waveshare 13.3inch PiPad C4 (EU)

DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008

Aluminum enclosure dedicated to the Ettus USRP B200mini. It protects the plate against mechanical damage by increasing the operating temperature range. Digilent 6002-240-012

A sensor that detects the concentration of carbon monoxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0466

Adapter for power supply with 5.5 x 2.1 mm input and 3.4 x 1.3 mm output

Lepton 2.5 thermal imaging camera module with an adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi. SparkFun KIT-15948

Development board containing the STM32H743XI microcontroller, 5MP OV5640 camera module, FLIR Lepton socket and the VL53L0X laser rangefinder. Also equipped with a 4.3 "LCD display. SparkFun DEV-18482

LWIR thermal imaging camera module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 63.5° (diagonal) and 50° (horizontal) and can download data with a frequency of up to 8.6 Hz via the SPI interface. SparkFun SEN-16465

Camera module based on the CMOS MT9V034 matrix with a resolution of 752x480 px (0.36 MPx). Intended for use with OpenMV kits. SparkFun SEN-16775

Step-Up/Step-Down converter module based on the S13V15F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2 A. Pololu 4084

Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885

Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587

4-channel industrial-grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO 4CH TTL

Digital tuner for terrestrial TV reception in DVB-T, DVB-T2 HEVC and DVB-C standards on notebooks and computers. Rebel KOM1060

Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044

A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912

Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972

Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012

Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a router. Seeed Studio 103110042

Acrylic housing designed for Seeeduino XIAO Expansion Board modules. Provides good protection against damage and has a dedicated space for the battery. Seeed Studio 110010024