.png)
2-channel motor driver module with L298N chip
ID: 1197831
5902186317284
zł9.25
Tax included
zł7.52 tax excl.
This L298N module allows independent control of two DC motors or one stepper motor, ideal for robotics and DIY projects. It supports power supplies from 7V to 35V and has a built-in 5V regulator that can power additional circuits. Control is performed via the ENA, ENB, and IN1–IN4 pins, allowing for adjustable rotational direction and speed. The module is equipped with protection diodes and filter capacitors for stable and reliable operation.
Description
The L298N Dual H-Bridge Motor Driver is a popular motor driver module, ideal for applications in robotics, remote-controlled vehicles, and educational projects. Featuring the L298N chip, the module offers low heat generation and high resistance to interference. The driver has two built-in H-bridges, allowing independent control of two DC motors or one stepper motor. It is equipped with a built-in 5 V regulator, which automatically powers the logic circuit when the supply voltage is between 7 V and 35 V. Note that when the 5 V supply on the board is active, you must not apply additional voltage to the +5V pin, but you can use this pin as a power source for other circuits. Control is achieved via ENA, ENB, and IN1-IN4 pins, which manage the OUT1-OUT4 outputs, enabling direction and speed control of the motors. The module is equipped with large filter capacitors and protective diodes, which increase its reliability when working with motors. Thanks to its compact size, ease of connection, and high versatility, the L298N is an excellent choice for projects requiring precise motor control.
Features
- Controller chip: ST L298N (dual H-bridge)
- Logic voltage: 5 V
- Logic current consumption: 0 to 36 mA
- Motor supply voltage: 5 V to 35 V
- Maximum current per channel: 2 A
- Maximum power: 25 W
- Operating mode: dual H-bridge
- Protections: freewheeling diodes
- Built-in regulator: 5 V (for input voltage 7–35 V)
- Operating temperature: -20°C to +135°C
- Dimensions: 43 × 43 × 27 mm
1197831
Data sheet
- Output current
- 2A
- Number of channels
- 2
- Supply voltage min
- 5 V
- Supply voltages max
- 35 V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Motor with 25 mm diameter and 58 mm length, 378:1 metal gear, 12 V operating voltage, 0,1 A to 1,1 A power consumption, 14 RPM speed and 23 maximum torque. Pololu 3258
zł142.09
24h
Available quantity: 1
Available
Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 200 RPM speed, 8,5 maximum torque and 48 CPR encoder. Pololu 4805
zł246.42
24h
Available quantity: 2
Available
Other products in the same category (16)
A single-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5077
zł50.37
24h
Available quantity: 2
Available
A single-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5076
zł54.44
24h
Available quantity: 2
Available
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075
zł47.16
24h
Available quantity: 1
Available
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5074
zł54.44
24h
Available quantity: 2
Available
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł67.58
4 weeks
No product available!
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł96.96
24h
Available quantity: 1
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 3 A per channel
zł53.97
24h
Available quantity: 4
Available
The UX-52 panel brush motor speed controller is a versatile device with speed adjustment from 90 to 1400 rpm. It offers precise control of motors with an input voltage of 220VAC, featuring a solid construction and a convenient digital display.
zł104.76
24h
Available quantity: 2
Available
KAmod Motor Driver is an advanced DC motor controller powered by 6-30 V, enabling power regulation using the PWM method and control of the direction of rotation, compatible with analog and PWM signals from various sources, equipped with overload and thermal protections and soft start and stop functions
zł61.91
24h
Available quantity: 234
Available
The dual-channel KAmod Motor Driver TB6612FNG with MOSFET H-bridges enables precise control of DC and stepper motors with PWM frequency up to 100 kHz. The compact design, wide voltage range, and protections make the module suitable for mobile projects, robotics, and automation.
zł18.91
24h
Available quantity: 199
Available
This L298N module allows independent control of two DC motors or one stepper motor, ideal for robotics and DIY projects. It supports power supplies from 7V to 35V and has a built-in 5V regulator that can power additional circuits. Control is performed via the ENA, ENB, and IN1–IN4 pins, allowing for adjustable rotational direction and speed. The module is equipped with protection diodes and filter capacitors for stable and reliable operation.
zł9.25
24h
Available quantity: 13
Available
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972
zł16.95
24h
Available quantity: 3
Available
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous currents up to 1.3 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4971
zł18.66
4 weeks
No product available!
This board allows for simultaneous control of two motors with full direction and stopping control, ideal for robotic buggies and educational vehicles. It features built-in short circuit, overload, and overheat protection, as well as a stabilized 3V output to power the micro:bit. The Edge Connector and additional pins allow for easy connection of sensors, switches, and accessories, expanding the project\'s functionality. Programming is supported by dedicated MakeCode blocks and support for the Kitronik 5698 Python.
zł72.20
24h
Available quantity: 2
Available
An H-bridge driver that provides bidirectional control of a high-power DC motor with a voltage range of 5-60 V and a continuous current of up to 11 A. The module supports PWM signals up to 100 kHz, features a current measurement (CS) output based on the ACS711 sensor, and features reverse polarity and short-circuit protection. It is compatible with both 3.3 V and 5 V logic, enabling easy integration with popular microcontroller platforms. Ideal for robotics, automation, and DIY projects requiring high performance and reliability. Pololu 2993
zł214.81
24h
Available quantity: 2
Available
FeatherWing expansion board for controlling DC motors, stepper motors, and servo motors, based on the PCA9685 PWM controller and TB6612FNG H-bridge drivers. Adafruit 3243
zł108.42
24h
Available quantity: 2
Available
This L298N module allows independent control of two DC motors or one stepper motor, ideal for robotics and DIY projects. It supports power supplies from 7V to 35V and has a built-in 5V regulator that can power additional circuits. Control is performed via the ENA, ENB, and IN1–IN4 pins, allowing for adjustable rotational direction and speed. The module is equipped with protection diodes and filter capacitors for stable and reliable operation.