Serial Controlled Motor Driver - two-channel DC motor controller with DRV8835 system
ID: 563260
zł88.41
Tax included
zł71.88 tax excl.
Two-channel DC motor driver communicating via UART, SPI or I2C interface. It can control the movement of 3 to 11V motors with a maximum continuous current of 1.2A per channel. SparkFun ROB-13911
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Two-channel DC motor driver based on DRV8835 with built-in PSoC CY8C4245LQI-483 chip. It can control the movement of 3 to 11V motors with a maximum continuous current of 1.2A per channel. Thanks to the built-in microcontroller, the module is flexible in terms of the control method and can communicate via UART, I2C or SPI interfaces. The implemented protocol allows you to choose one of 127 speed levels. The module has the ability to configure the I2C address, which allows you to connect up to 12 controllers on one line. Besides, two boards can be connected together to double the current efficiency of the module. The controller works with the voltage of the logic part of 3.3 V. Full documentation is available on the product page.
Features
- Instantaneous current 1.5 A per channel, continuous 1.2 A
- Supply voltage of motors: from 3 to 11 V
- Supply voltage of the logic part: 3.3 V
- 127 speed levels
- Controlled by I2C, SPI or TTL UART
- Configurable I2C address (up to 12 addresses)
- Bridged outputs
- Optional security
- Configurable baud rate of the I2C bus up to 50, 100 or 400 kHz
563260
Data sheet
- Output current
- 1,2 A
- Number of channels
- 2
- Supply voltage min
- 3 V
- Supply voltages max
- 11 V
You might also like
Available
Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451
zł88.20
Delivery date unknown
No product available!
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
zł5.06
24h
Available quantity: 62
Available
DC motor equipped with a metal gear 1:90 with a cut shaft on both sides
zł14.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. Operating voltage range from 0 V to 11 V, built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. Pololu 2990
zł21.48
24h
Available quantity: 2
Available
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł65.28
24h
Available quantity: 1
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł71.91
24h
Available quantity: 2
Available
The core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. This version does not include any through-hole components or connectors, allowing for customized assembly or standalone use. Pololu 3118
zł154.16
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5053
zł272.81
6 weeks
No product available!
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
zł128.01
24h
Available quantity: 1
Available
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
zł133.64
24h
Available quantity: 2
Available
Pololu Simple Motor Controller 18v7
zł736.12
6 weeks
No product available!
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł71.64
24h
Available quantity: 4
Available
DC motor driver with a working voltage from 5 to 30 V and a maximum continuous current of 13 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD10C
zł63.09
24h
Available quantity: 10
Available
The DC motor driver module enables the motor to be controlled using a PWM signal with several supply voltages (3V, 6V, 12V, 24V and 35V) and a maximum continuous current of 5A.
zł7.90
24h
Available quantity: 40
Available
Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 1.1 A. Pololu 4037
zł24.86
24h
Available quantity: 7
Available
No product available!
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł193.00
24h
Available quantity: 1
Available
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
zł142.90
24h
Available quantity: 2
Available
Pololu Simple High-Power Motor Controller 24v23
zł979.55
6 weeks
No product available!
Two-channel DC motor driver communicating via UART, SPI or I2C interface. It can control the movement of 3 to 11V motors with a maximum continuous current of 1.2A per channel. SparkFun ROB-13911