zł58.32 tax excl.
BME680 environmental sensor module for measuring temperature, humidity, atmospheric pressure, and parameters used for air quality assessment. It communicates over I2C at address 0x76 and features two Qwiic connectors for integration with compatible boards. The breakout supports 3.3V and 5V power supplies. Soldered 333035
The device Enviromental & Air Quality Sensor BME680 Breakout by Soldered uses the BME680 sensor from Bosch to measure temperature, relative humidity, atmospheric pressure, and gas sensor resistance. Gas sensor data can be processed to determine an IAQ air quality index. Altitude can also be calculated from atmospheric pressure measurements.
The temperature measurement range is -40 to 85°C, relative humidity range is 0–100% RH, and pressure range is 30–110kPa. The manufacturer specifies a temperature accuracy of ±1°C, humidity accuracy of ±3% RH, and pressure accuracy of ±12Pa. The specified IAQ index range is 0–500.
Communication with a microcontroller is provided through the I2C bus with a fixed address of 0x76. The board features two Qwiic connectors for connection to compatible development boards and additional modules without separate SDA and SCL wiring. VCC, GND, SDA, and SCL pins are also available for conventional header connections.
The board uses 3.3V logic and includes a regulator allowing operation from a 3.3V or 5V supply. The manufacturer specifies a maximum current consumption of 849µA during measurement and 0.15µA in idle mode. Board dimensions are 22 × 22mm. Applications include weather stations, environmental monitoring devices, building automation systems, and air quality monitoring equipment.
Data sheet
Digital gas sensor solution that senses a wide range of Total Volatile Organic Compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels, intended for indoor air quality monitoring in personal devices such as watches and phones, but we’ve put it on a breakout board so you can use it as a regular I2C device. SEN-14193
The module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. Planter PMSA003-C
Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. The set includes a UART-USB converter. Nova Fitness SDS011
No product available!
Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. Nova Fitness SDS018
Module with SGP30 gas sensor. The sensor communicates via the I2C interface. SGP30 system contains several elements reacting to various metal oxides, which allows for more accurate determination of air quality. Adafruit 3709
Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386
PM2.5 dust sensor powered by 5V, communication via the UART interface. Sharp GP2Y1051AU0F
Total suspended particulate (TSP) sensor that allows you to measure the particle concentration from 1 to 100 μm. SDS198
Air quality sensor module based on SGP30 system. The board has been equipped with Qwiic connectors. SparkFun SEN-16531
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
Sharp GP2Y1010AU0F dust and particle concentration sensors. It is supplied with the voltage from 5 to 7V. Has an analog output. DFRobot SEN0144
Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
No product available!
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
BME680 environmental sensor module for measuring temperature, humidity, atmospheric pressure, and parameters used for air quality assessment. It communicates over I2C at address 0x76 and features two Qwiic connectors for integration with compatible boards. The breakout supports 3.3V and 5V power supplies. Soldered 333035