

zł243.09 tax excl.
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO with I2C, SPI, UART and I2S interfaces, a Gigabit Ethernet port, one USB 3.2, two USB 2.0 and one micro USB, as well as a MIPI CSI camera input - 2 and HDMI video output.
1. Main module socket | 9. Gigabit Ethernet |
2. microSD | 10. 2 x USB 2.0 |
3. M.2 Key E | 11. USB 3.2 Gen 1 |
4. Fan connector 1,25mm | 12. HDMI |
5. PoE pins | 13. USB typu C |
6. 40-pin GPIO | 14. PWR button |
7. Fan connector 2,54mm | 15. RST button |
8. Micro USB | 16. MIPI CSI |
The board is a good base for prototyping devices based on NVIDIA modules. Compared to the original baseplate used in the NVIDIA Jetson Nano B01 Development Kit, Waveshare has made several changes:
Full documentation with configuration examples are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
NVIDIA module with ARM Cortex A57 1.43GHz CPU and Maxwell graphics chip consisting of 128 cores supporting CUDA technology. The module has DDR4 4GB RAM memory. NVIDIA Jetson Nano Module
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
5.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 1920x1080 pixels. Waveshare 5.5inch HDMI AMOLED
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
Dedicated heat sink for NVIDIA Jetson Nano minicomputers. Waveshare NANO-HEATSINK
Expansion board with 5G module RM520N-GL dedicated to NVIDIA Jetson Nano minicomputers. The module supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. It also offers the ability to support GNSS positioning systems, including GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare RM520N-GL 5G for Jetson Nano (EU)
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
No product available!
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
Camera module designed for NVIDIA Jetson Nano/Xavier. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0274
No product available!
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
No product available!
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE