

zł996.38 tax excl.
Expansion board with 5G module RM520N-GL dedicated to NVIDIA Jetson Nano minicomputers. The module supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. It also offers the ability to support GNSS positioning systems, including GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare RM520N-GL 5G for Jetson Nano (EU)
5G/4G/3G communication and GNSS positioning module designed to work with the NVIDIA Jetson Nano kit. It guarantees multi-band frequency support, so the device can be used in countries and regions such as China, Japan, South Korea, Europe and the Middle East. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. RM520N-GL supports positioning within GPS, GLONASS, Beidou, Galileo and QZSS systems. The module allows you to make phone calls, support SMS, MMS, mail, TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0. The board has a 40-pin connector for connecting the module to Jetson Nano and a 3.5 mm audio connector, a SIM card slot, a USB connector for communication with RM520N-GL using AT commands and connectors for connecting antennas. The base plate has a standard M2 connector, which allows connection to various 4G or 5G communication modules with an M2 connector. Full documentation is available on the product Wiki page.
1. M2 Connector | 10. Reset |
2. USB 3.1 | 11. Power switch |
3. Jack 3,5 mm | 12. Power circuit |
4. 40-pin connector | 13. Audio circuit |
5. Fan connector | 14. Power supply jumper |
6. Nano SIM socket | 15. PWR jumper |
7. Power supply 5V 3A | 16. Reset jumper |
8. Network indicator | 17. Audio IN/OUT |
9. Power indicator |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
An 8MP camera designed to work with NVIDIA Jetson boards, as well as other systems such as ARM, DSP, and FPGA, offering a wide field of view and high image quality. The camera is very sensitive to infrared light due to the lack of an IR filter, which allows it to be used in applications such as night vision systems, heat detection, and robotic vision systems. ArduCAM B0193
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Cooling fan dedicated to the NVIDIA Jetson Orin NX and Orin Nano minicomputers. Waveshare Orin-FAN-PWM
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
No product available!
Heatsink designed for NVIDIA Jetson TX1 and TX2 modules with dimensions of 87 x 57 x 16 mm. It allows for effective cooling of the processor while maintaining silence. XHG301
No product available!
Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B
No product available!
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
No product available!
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
No product available!
Dedicated heat sink for NVIDIA Jetson Nano minicomputers. Waveshare NANO-HEATSINK
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
No product available!
Expansion board with 5G module RM520N-GL dedicated to NVIDIA Jetson Nano minicomputers. The module supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. It also offers the ability to support GNSS positioning systems, including GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare RM520N-GL 5G for Jetson Nano (EU)