![Main view Main view](https://kamami.pl/65989-large_default/tda7492-2x50w-10v-26v-stereo-audio-amplifier.jpg)
![Main view Main view](https://kamami.pl/65989-large_default/tda7492-2x50w-10v-26v-stereo-audio-amplifier.jpg)
zł40.57 tax excl.
Stereo audio amplifier based on the TDA7492 chip. It can be powered with the voltage from 10 to 26 V and has two outputs with a power of 50 W
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Digital audio amplifier based on the TDA7492 chip. It has two channels with a power of 50 W and is supplied with a voltage in the range from 10 to 26 V through a screw connection. The audio input can be connected via a 3-pin connector, while the outputs are led out on screw connectors. A large heat sink is responsible for proper heat dissipation. It can be used as an element of a home audio system.
Class D digital audio amplifier. It has two channels with a power of 160 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 15 to 36 V.
Stereo audio amplifier with Bluetooth 4.0 communication. It can be powered with 12 V and has two 25 W outputs
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954
LM386 mono digital audio amplifier module. It has a voltage gain of 200 and is powered from 5V to 12V
Digital stereo audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 100 W and can work with speakers from 4 to 8 Ω. Powered with voltage from 5 to 24 V. 1002M
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. SUCA-AUDIO TUBE-T1
No product available!
Audio amplifier with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication
A module with an active low-pass filter based on NE5532 systems. Dedicated to the bass column (subwoofer)
No product available!
TDA2030A mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 18 W
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
SJ2038 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3.5 W
The TPA3116DA 150W XH-M544 audio amplifier module is a compact device with a wide input voltage range (12-26V) and output power up to 150W (100W recommended), ensuring clear sound with a signal-to-noise ratio of 100dB. The small size (77 x 73 x 19mm) makes it an ideal choice for a variety of audio projects.
Class A power amplifier with two channels, 20 W. Built on the popular J. Hood design from 1969
Class D LTK5128 mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 5 W
Stereo audio amplifier with Bluetooth 4.0 communication. It can be powered with 12 V and has two 25 W outputs
Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885
Stereo audio amplifier based on the TDA7492 chip. It can be powered with the voltage from 10 to 26 V and has two outputs with a power of 50 W