Module with active low-pass filter 22-300Hz
ID: 587874
5906623464845
zł13.68
Tax included
zł11.12 tax excl.
Module with active low-pass filter. Dedicated to the bass column (subwoofer)
Description
Module with active low-pass filter. The input and output signals are connected via screw connections. Two potentiometers allow you to smoothly adjust the gain and cut-off frequency in the range from 22 Hz to 300 Hz. Thanks to the filter used, only the low tones (bass) are amplified, which is why the module is dedicated to bass speakers (subwoofer). The board should be connected between the audio input and the power amplifier. It works well in home and car audio systems.
Features
- Active low-pass filter
- Potentiometer for gain adjustment
- Potentiometer for adjusting the cut-off frequency: 22 Hz to 300 Hz
- Input: ARK screw connection
- Output: ARK screw connection
- Power supply: voltage 10 to 24 V DC
- Dimensions: 78 x 32 mm
587874
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.42
24h
Available quantity: 3
Available
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
24h
Available quantity: 14
Available
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.30
24h
Available quantity: 5
Available
A module with an active low-pass filter based on NE5532 systems. Dedicated to the bass column (subwoofer)
zł23.58
24h
Available quantity: 3
Available
Other products in the same category (16)
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.30
24h
Available quantity: 5
Available
Zeenko ZK04-UM is a compact low-noise RF amplifier operating in the 100 kHz – 4 GHz range, powered via USB-C, featuring high linearity and low noise levels. Ideal for amplifying antenna signals or as a preamplifier for spectrum analyzers such as the tinySA ULTRA, especially above 3.5 GHz.
zł55.93
6 weeks
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
zł156.58
4 weeks
No product available!
Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357
zł11.89
24h
Available quantity: 13
Available
An audio module with a DAC converter and a stereo amplifier designed to work with the Raspberry Pi. Adafruit 3346
zł67.19
24h
Available quantity: 1
Available
The module with digital stereo audio amplifier is equipped. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W
zł9.90
24h
Available quantity: 10
Available
Zeenko ZK09-BM is a low-noise, ultra-wideband RF amplifier with an operating range up to 10 GHz, powered by a built-in battery. Thanks to its good linearity and noise performance, it is used in measurements, receiver paths and communication systems. Compact and mobile, it will work well both in laboratories and in the field.
zł103.97
6 weeks
No product available!
2-channel stereo audio mixer module. It has four outputs, on which the summed signal from 2 inputs is available. It is powered with the voltage from 5 to 19 V
zł80.21
24h
Available quantity: 3
Available
Stereo audio amplifier based on the TDA7498 chip. It can be powered with the voltage from 20 to 36 V and has two 100 W outputs
zł73.74
4 weeks
No product available!
Module dedicated to the audio preamplifier with DIP8 socket for NE5532, OPA2134, OPA2604 or AD826 chips
zł8.23
24h
Available quantity: 10
Available
Stereo audio preamplifier based on two uPC4570C operational amplifiers. It allows you to control the bass, treble and volume level
zł210.17
4 weeks
No product available!
TDA2030A mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 18 W
zł5.13
24h
Available quantity: 9
Available
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. SUCA-AUDIO TUBE-T1
zł253.07
4 weeks
No product available!
PAM8302 Class D mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance of 4 to 8 Ω and a power of 2.5 W. The board is equipped with a STEMMA connector. Adafruit 5647
zł25.53
4 weeks
No product available!
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
zł17.26
4 weeks
No product available!
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 26 V and has two outputs with a power of 120 W
zł46.70
24h
Available quantity: 49
Available
Module with active low-pass filter. Dedicated to the bass column (subwoofer)