

zł88.11 tax excl.
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 WiFi. It is equipped with ESP32-S3FN8 with a dual-core 32-bit Xtensa LX7 core and wireless communication in the 2.4GHz WiFi band and Bluetooth LE. Waveshare R7FA4 PLUS B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The development board based on the R7FA4M1AB3CFM microcontroller, compatible with Arduino UNO R4 WiFi, offers extensive capabilities for designers and electronics enthusiasts. The R7FA4 microcontroller with a 32-bit ARM Cortex-M4 core operates at a clock frequency of 48MHz and features 256kB Flash memory and 32kB RAM. Additionally, the board is equipped with the ESP32-S3FN8 module, featuring a dual-core 32-bit Xtensa LX7 core running at a clock frequency of 240MHz, with 384kB ROM, 512kB RAM, and 8MB Flash. This module supports wireless communication in the 2.4GHz WiFi and Bluetooth LE bands. The board also includes a 12×8 red LED matrix for customizable display effects.
1. R7FA4M1AB3CFM | 10. ESP32-S3 Connector |
2. ESP32-S3-MINI-1 Module | 11. USB Communication Selection |
3. Voltage Regulator 5V MP8759 | 12. ICSP Interface |
4. Voltage Level Shifter TXB0108DQSR | 13. Power Configuration |
5. Voltage Regulator 3.3V AMS1117-3.3 | 14. Reset Button |
6. DC Input (6V to 24V) | 15. Arduino Interface |
7. Qwiic Connector | 16. User LEDs |
8. USB Type-C Connector | 17. TX/RX Indicators |
9. Power Output Connector | 18. Power LEDs |
19. 12×8 LED Matrix |
The board can be powered with a voltage ranging from 6 to 24V, with a working voltage of 3.3V or 5V. It features a horizontal reset button. IO pins can provide an output current of 8 mA. The board has 14 digital pins and 6 analog pins, as well as 2 DACs, 6 PWMs, 1 UART, 1 I2C, 1 SPI, and 1 CAN. It also includes a low-profile DC jack and a 5V power output of up to 2000 mA.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The set contains: MQ-5 Gas Sensor, Color Sensor, Flame Sensor, Hall Sensor, Infrared Reflective Sensor, Laser Sensor, Moisture Sensor, Rotation Sensor, Sound Sensor, Temperature-Humidity Sensor, Tilt Sensor, UV Sensor, Liquid Level Sensor. Modules compatible with Arduino
TSL25911FN light sensor module that can measure both visible and infrared light. It communicates via an I2C interface. Waveshare TSL25911 Light Sensor
A development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
No product available!
A miniature board with dimensions of 20x22 mm with an ATmega32U4 microcontroller. Compatible with Arduino Leonardo. DFRobot DFR0816
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
Adafruit Trinket - Mini Microcontroller - 5V Logic
DFRduino Nano V4.0 is a base plate compatible with Arduino Nano. The board has an ATmega 328-20AU microcontroller. The user has 14 GPIO ports (inputs / outputs), of which 6 can generate PWM signal. DFRobot DFR0010
No product available!
Base board compatible with Arduino. It was equipped with an ATmega328P microcontroller. It has 22 I / O lines (including 6 PWM channels) and 8 analog inputs and a Qwiic connector. SparkFun DEV-18158
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
IoT development board with ATmega32U4 microcontroller and W5500 Ethernet chip. Compatible with Arduino Leonardo, has a built-in PoE (Power over Ethernet) function. DFRobot DFR0342
A circuit board compatible with Arduino Leonardo equipped with an Atmega32U4 microcontroller, an SD card reader, a text display 8x2 characters and a step-up / step-down converter. Polol 4009
The SparkFun AST-CAN485 board is a miniature Arduino in a compact Pro Mini housing with a built-in CAN (Control Area Network) and RS485 ports. Sparkfun DEV-14483
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
No product available!
Beetle BLE is another milestone in wearable electronics device area based Arduino Uno, which makes DIY users have more options in the project design. It is fully compatible with Bluno in instructions and procedures, supporting Bluetooth HID and ibeacon modes. And it not only supports USB programming, but also wireless programming method. DFR0339
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 WiFi. It is equipped with ESP32-S3FN8 with a dual-core 32-bit Xtensa LX7 core and wireless communication in the 2.4GHz WiFi band and Bluetooth LE. Waveshare R7FA4 PLUS B