New products
New products New products
zł259.00
Delivery date unknown
Available
zł50.18
24h
Available
SIM7000E NB-IoT / LTE / GPRS / GPS - shield for Arduino
ID: 571796
5902186313736
zł234.98
Tax included
zł191.04 tax excl.
Advanced expansion board for Arduino. It has support for mini-SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7-12V voltage. DFRobot DFR0572
Description
SIM7000E Arduino NB-IoT / LTE / GPRS / GPS Expansion Shield is an advanced expansion board with wireless communication modules designed for Arduino . It is based on the SIM7000E SIMCom system. The module supports multi-frequency LTE-FDD, GPRS / EDGE and NB-IoT communication. SIM7000E is widely used in the European frequency band.
The NB-IoT technology (Narrow Band-Internet of Things) is a new technical area of IoT and supports the connection to the cellular network of low power devices in the WAN network (Wide Area Network), also known as LPWAN. NB-IoT operates in an authorized frequency spectrum. It can be directly implemented in GSM, UMTS and LTE systems without any disruption to current networks.
The expansion board has a built-in GNSS module (Global Navigation Satellite System) that supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. It has SIM card inputs (thanks to which it can be used for standard operations performed on the phone, like calling or sending an SMS), as well as for the NB-IoT card, which enables communication within the NB-IoT technology. In addition, the module has a BME280 environmental sensor that allows monitoring of temperature, humidity and pressure, eg in the framework of NB-IoT.
Attention!
The module for operation requires a mini-SIM card (or NB-IoT card) placed in the board slot. To use micro-SIM or nano-SIM cards, use an adapter.
properties
- Intended for use with Arduino tiles
- Communication module: SIM7000E includes communication: TDD-LTE, FDD-LTE B3 / B8 / B20 / B28, GPRS / EDGE 900/1800 MHz and is configured using AT commands
- Support for GNSS navigation (GPS, GLONASS, BeiDou, Compass, Galileo, QZSS)
- SIM card and NB-IoT slot
- BME280 environmental sensor: temperature, pressure and air humidity measurement
- Operating temperature: -30 ~ 85 ?
- Supply voltage: 7-12 V (VIN range: 6-20 V)
- Dimensions: 53.4 x 68.6 mm
Included
- SIM7000E Arduino NB-IoT / LTE / GPRS / GPS Expansion Shield
- GPS antenna
- GSM antenna
571796
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
zł163.28
24h
Available quantity: 11
Available
Other products in the same category (16)
Board with the GNSS Cinterion TX62 module with support for Cat. M1 and NB IoT. Dedicated for Arduino Portenta H7. Arduino ASX00027
zł455.68
3 weeks
No product available!
Pololu 2512Module with 2-channel DC motor driver for Arduino boards. It allows you to control drives with a supply voltage from 6 to 32 V and a current consumption of up to 0.65 A. Pololu 2512
zł66.92
24h
Available quantity: 3
Available
Shield with DC motor driver for Arduino. It has an operating voltage of 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MD10
zł59.91
24h
Available quantity: 7
Available
Expansion module with a joystick and buttons, resembling a gamepad. Enables the connection of the nRF24L01 radio module, Nokia 5110 display, Bluetooth module, I2C devices and Arduino kit. modKeyPad
zł11.11
24h
Available quantity: 6
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for self-assembly. Pololu 5046
zł435.53
4 weeks
No product available!
Compact, bidirectional analog joystick module with a pushbutton. It can be used in Arduino-based and interactive projects
zł4.55
24h
Available quantity: 3
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5041
zł302.08
4 weeks
No product available!
I/O pin expander designed for Arduino platforms. Provides 48 connections to increase the number of analog inputs, digital inputs and digital outputs. SparkFun DEV-11723
zł160.20
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5045
zł456.85
4 weeks
No product available!
An Arduino extension that allows you to simultaneously control four DC motors, two stepper motors, or two 5V servos. It uses an L293D chip, which provides stable operation and a current of up to 1.2A per channel at motor voltages of 4.5-12V. An 8-stage shift register reduces the number of pins needed for control, allowing for more efficient use of microcontroller resources. Elecrow Four Channels Motor Shield
zł10.92
24h
Available quantity: 4
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10
zł119.00
24h
Available quantity: 1
Available
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
zł28.91
24h
Available quantity: 210
Available
The overlay solves the problem of limitations in the use of multiple overlays compatible with Arduino UNO R3. The board allows you to connect different shields without their mutual influence on each other (eg without conflict on the UART bus or GPIO lines). Extension dedicated for Arduino Mega and ADK devices. DFRobot DFR0256
zł48.87
24h
Available quantity: 1
Available
The X-NUCLEO-53L0A1 expansion board features the VL53L0X ranging and gesture detection sensor, based on ST’s FlightSense™, Time-of-Flight technology. It is an evaluation board that provides an introduction to the ranging and gesture detection capabilities of the VL53L0X module
zł183.28
1 weeks
No product available!
Expansion Shield For Arduino Mega 2560 or 1280
zł11.78
24h
Available quantity: 6
Available
Advanced expansion board for Arduino. It has support for mini-SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7-12V voltage. DFRobot DFR0572