- New
RP2350B-Plus-W board with RP2350B microcontroller and Wi-Fi/Bluetooth module - Waveshare 32048
ID: 1201219
zł57.71
Tax included
zł46.92 tax excl.
RP2350B-Plus-W is an advanced development board with an RP2350B microcontroller and wireless Wi-Fi/Bluetooth communication, enabling selection between ARM and RISC-V architectures. Intended for educational applications, IoT device prototyping, and projects requiring versatile communication and processing capabilities.
Description
The RP2350B-Plus-W development board by Waveshare based on the Raspberry Pi RP2350B microcontroller enables operation in ARM Cortex-M33 or RISC-V Hazard3 dual-core architecture, with a maximum frequency of 150 MHz. The integrated Raspberry Pi Radio Module 2 communication module based on the Infineon CYW43439 chip provides wireless connectivity in Wi-Fi 4 and Bluetooth 5.2 standards. The device is equipped with 520 kB of SRAM and 16 MB of Flash memory and allows further expansion thanks to pads for mounting a PSRAM chip.
The board features a USB Type-C connector supporting device and host modes (USB 1.1), 41 multifunctional GPIO pins including SPI, I2C, UART interfaces, 6 12-bit ADC channels, 22 PWM channels and 12 PIO programmable state machines. It supports drag-and-drop programming via USB mass storage, as well as C/C++, MicroPython and Arduino IDE environments. Also included are BOOT and RESET buttons and two LED indicators.
The RP2350B-Plus-W is used in projects requiring flexibility of CPU architecture, wireless communication and low power consumption, as well as an experimental platform for learning microcontroller programming in RISC-V and ARM architecture.
Properties
- Raspberry Pi RP2350B microcontroller with two Cortex-M33 or Hazard3 RISC-V cores
- Clock speed up to 150 MHz
- 520 kB SRAM memory
- 16 MB NOR Flash memory
- Pads for external PSRAM chip mounting
- Raspberry Pi Radio Module 2 with Wi-Fi 4 and Bluetooth 5.2 (Infineon CYW43439 chip)
- USB 1.1 with host and device mode support
- USB Type-C connector
- 41 GPIO pins (multifunctional)
- Interfaces: 2× SPI, 2× I2C, 2× UART, 6× ADC (12-bit), 22× PWM
- 12 PIO state machines
- Built-in temperature sensor
- Built-in BOOT and RESET buttons
- Two LEDs (one for MCU and one for Wi-Fi module)
- Low power consumption: sleep and standby modes
- Support for C/C++, MicroPython, Arduino IDE
1201219
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 41
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- No
- Length
- 51mm
- Width
- 21 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with a round 0.99" IPS LCD display with a resolution of 128x115 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-0.99-B
zł77.53
24h
Available quantity: 2
Available
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
zł106.76
4 weeks
No product available!
Raspberry Pi Pico 2, based on the RP2350 microcontroller, using the application and functional applications of the Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security function, including Arm TrustZone. It is hardware and software with a connected model, which provides an attractive operation for enthusiasts and specialists in systems used
zł24.50
24h
Available quantity: 1299
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
24h
Available quantity: 1
Available
RP2350-Touch-AMOLED-1.8 is a compact board with a touchscreen AMOLED display, an RP2350A microcontroller, and a rich set of peripheral features. It enables rapid development of modern interactive devices with a graphical interface, sensor support, and audio, ideal for educational and embedded applications.
zł121.54
24h
Available quantity: 3
Available
An enhanced version of the Raspberry Pi Pico 2 with access to all 48 GPIO pins and an RP2350B microcontroller (Cortex-M33 or RISC-V) clocked at up to 150 MHz. It offers 16 MB of Flash, 8 MB of RAM, and a microSD card reader, making it ideal for complex embedded and IoT projects. With USB-C, Qwiic/Stemma Qt, UEXT connectors, and BOOT/RESET buttons, it offers high flexibility and easy integration with peripherals. Olimex RP2350-PICO2-XXL
zł58.23
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
zł19.45
24h
Available quantity: 5
Available
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 3
Available
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
24h
Available quantity: 2
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
zł130.07
24h
Available quantity: 11
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 321
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł127.38
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 65
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
4 weeks
No product available!
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
zł55.77
24h
Available quantity: 18
Available
RP2350B-Plus-W is an advanced development board with an RP2350B microcontroller and wireless Wi-Fi/Bluetooth communication, enabling selection between ARM and RISC-V architectures. Intended for educational applications, IoT device prototyping, and projects requiring versatile communication and processing capabilities.