zł104.83 tax excl.
Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7
Waveshare 33489 is a standalone development board based on the RP2350B microcontroller, equipped with an integrated 7-inch LCD display with a resolution of 800 x 480 and a color depth of 65K. The board is intended for embedded projects requiring a local graphical user interface and does not require cooperation with Raspberry Pi or any other single-board computer.
The applied RP2350 microcontroller offers a dual-core and dual-architecture design, enabling operation with ARM Cortex-M33 cores or Hazard3 RISC-V cores, with a clock frequency of up to 150 MHz. The board integrates Flash memory and PSRAM, a TF card slot, and numerous communication interfaces, allowing its use in control systems, user interfaces, measurement devices, and electronics prototyping.

Note!
The described RP2350-LCD-7 version does not include a touch panel, and interaction with the system is carried out via software interfaces and external peripheral devices.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
No product available!
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
No product available!
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
No product available!
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7