Best sellers

Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577

Ready-to-use LED controller with ESP32 and enclosure, compatible with WLED. Wi-Fi support, 5V outputs, microphone, IR, NeoPixel, and screw terminals. Adafruit 6333

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

soldering iron   WEP 992DA +   is a hot air soldering station and a soldering iron. It is equipped with a PID microprocessor, used for soldering and desoldering electronic components, shrinking, welding plastics, heating. WEP 992DA + 3in1

Module with two GC0328 cameras designed to work with Sipeed MAix kits. The set has been designed for AI and stereo vision applications. Seeed Studio 114991702

Aluminum bracket with holes for M3 screws for 37D mm gear motors. Pololu 1995

STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876

Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM

8-channel solenoid driver controlled via I2C. Compatible with 3V/5V logic, features STEMMA QT / Qwiic connectors. Adafruit 6318

Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522

ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692

Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24

Pliers for connecting metal profiles L-260 MM used for drywall. It is a reliable and durable tool that will work perfectly in any professional workshop, ensuring precise and durable profile connections. Yato YT-51312

WP5320 digital servo with 20 kg·cm torque, featuring a brass-aluminum gear train and dual ball bearings, designed for precise positioning in RC, robotics, and automation projects. Durable construction with IP54 protection rating enables operation in demanding environmental conditions.

Locksmith\'s hammer made of high-quality steel. The hammer handle is made of solid wood, which ensures a firm grip and comfort of work. Yato YT-4508

Yato angle cutting scissors with a length of 245 mm are a professional tool with PVC on the handles, steel blades with a hardness of 53-57 HRC and aluminum in the body. Their ability to cut at various angles (22.5°, 45°, 90°) makes them an ideal tool for professionals and DIY enthusiasts for precise cuts in building and installation materials. Yato YT-18960

Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT

Pneumatic grinder dedicated to precise and effective grinding of various surfaces. It is made of a light yet durable composite, which makes the tool durable and easy to use. Yato YT-09633

Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756

A multifunctional board with dimensions of 120 x 90 cm dedicated to the micro:Maqueen and micro:Maqueen Plus robots. It allows you to implement line tracking scenarios. DFRobot MBT0011