New products
New products New products
Best sellers
There are 16552 products.
Hermetic enclosure Z124 with gasket ABS
YIHUA 938BD soldering station + thermocouple + 2 in 1 flask
Hermetic enclosure Z128 lightgray with lug with gasket and brass bushing ABS
Plastic enclosure Z24A ABS with lug
Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272
RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274
Kit for tracks drive construction. It consists of silicone tracks and plastic gears and a set of screws. Pololu 3033
LED strip with COB diodes in white (neutral). It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3653
The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 30 LEDs/m. Protection degree IP67
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. Standard PWM modeling is used for control. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servo has a Hall sensor. Pololu 3432
The 32L4R9IDISCOVERY kit is a complete demonstration and development platform for STMicroelectronics Arm® Cortex®-M4 core-based STM32L4R9AI microcontroller.