Best sellers
There are 16467 products.
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C. Pimoroni PIM448
8x8 matrix or a 4-digit 7-segment display. Matrices like these are \'multiplexed\' - so to control all the seven-segment LEDs you need 14 pins. Adafruit 1002
5 mW red laser diode module displaying a point. It uses the PWM signal for control. It can be supplied with the voltage from 4.8 V to 5.2 V. Adafruit 1056
Soldering station WEP 937D + with smoothly adjustable temperature in the range from 200 to 480 ° C, temperature sensor and LED display.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
A set of ferrules terminals. The box contains 840 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.
Adafruit 1141 - Adafruit Assembled Data Logging shield for Arduino
Adafruit 1126 - Sewable Snaps - 5mm Diameter - Card of 24
Pneumatic grinder, powered by compressed air at a pressure of 6.3 bar, reaches up to 20,000 rpm, has a 1/4" quick connector and a 6 mm spindle, capacity of 113 l/min, equipped with a connector for the pneumatic system and keys for mounting accessories, allows cutting and grinding of various materials. Vorel - 81110
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. Equipped with a capacitive touch screen, communicates via the DSI interface. Pimoroni PIM470
A compact development board that uses the ESP32-PICO-MINI chip. It provides wireless communication via Bluetooth and serves as an easy-to-configure UART converter. It has a built-in PCB antenna. SparkFun WRL-24113
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM475
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
Module with an e-Paper display with a diagonal of 4.26" and a resolution of 800x480 pixels. Thanks to communication via the SPI interface, it allows easy integration with various systems of microcontrollers and single-board computers, including Raspberry Pi. Waveshare 4.26inch e-Paper HAT
Knit conductive 100% silver fabric with resistance of less than 1 ohm per foot in any direction across the textile. Great for use with FLORA. 20 cm x 20 cm piece. Adafruit 1167
A set for building a smartwatch based on the micro: bit educational module. It consists of an expansion board and a strap
Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
Motor with 25 mm diameter and 52 mm length, 47:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 200 RPM speed and 8,5 maximum torque. Pololu 1574