Best sellers

USB-RS485/RS422 converter dedicated to industrial applications. It provides communication between USB interface and RS485 and RS422 serial standard. YN-4852

RS485 hub with signal amplifier function and built-in RS232 to RS485 converter. It is equipped with one RS485 input port and one RS232 port, and 4 RS485 output ports. Designed for communication within industrial networks. YN-5204

Altera Cyclone IV EP4CE6E22C8N FPGA development board in the set with the base board. Waveshare OpenEP4CE6-C Standard

USB - UART converter based on the FT232RNL chip. Compatible with voltages of 3.3 V and 5 V, it has been equipped with a miniUSB connector. Waveshare FT232 USB UART Board (mini)

 relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347

Development kit with STM32F407VGT6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core407V

Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera

The official camera module designed to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Version without IR filter. Raspberry Pi SC0873

Light sensor module in the form of a photoresistor. A comparator and a potentiometer are placed on the board. The module has a digital output

Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611

Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612

Adapter with SMA male connector on both ends. Allows the conversion of a female SMA connection with standard polarity to a male one. SparkFun WRL-21225

Universal multimeter that allows to measure DC and AC voltage, DC and AC current and resistance. Equipped with circuit continuity test and backlight, among other features. ANENG M107

Universal multimeter that allows to measure DC and AC voltage, DC and AC current, frequency, capacitance and resistance. Equipped with diode tester, circuit continuity test and transistor testing function, among others. ANENG SZ08

The XH-M131 module is a universal module that allows you to control devices with a current consumption of up to 10A depending on the light intensity, which makes it ideal as a twilight sensor for home or garage lighting. It is easy to operate with potentiometer light level adjustment, can be controlled by various 12V power sources and requires no soldering for easy installation. XH-M131

A complete drive in the form of a 100 mm diameter wheel integrated with a PMSM motor and controller. It communicates via RS485 bus and offers feedback information such as temperature, position, speed and current consumption. Waveshare DDSM115

The inverter is powered by 12V DC, it generates alternating current to supply electroluminescent wires that glow under the influence of high voltage supply

A female-female cable, 50 mm long, terminated on both sides with a JST-ZH 2-pin plug. Suitable for micro DC motor modules. Pimoroni CAB1012

NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT