Best sellers
There are 16576 products.
A set of ferrules terminals. The box contains 840 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.
Development board with ST Zio and ST morpho connectors, based on the STM32L552ZE microcontroller. Thanks to the built-in programmer compatible with ST-Link/v2-1, it is possible to program and debug the microcontroller via the USB connector. STMicroelectronics NUCLEO-L552ZE-P-Q
Motor with 37 mm diameter and 54 mm length, 70:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 140 RPM speed and 31 maximum torque. Pololu 4684
Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845
Easy PET-G filament in transparent orange with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Transparent Orange
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053
A set for building an interactive robot based on the micro: bit module. It can be programmed using tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot MBT0021-EN
C-Mount lens and C-CS adapter. Variable zoom lens 4-12 mm long, FoV 87.2° (H), 39° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN048
CS-Mount lens. 12 mm focal length, 30° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN040
CS-Mount lens. 16 mm focal length, 24° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN050
CS-Mount lens. 25 mm focal length, 14° FoV, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN041
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
Easy PET-G filament in transparent burgundy with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Transparent Burgundy
2in1 soldering station connecting hot air soldering iron and soldering tip. 700 W power station. Equipped with an LCD display, controlled by potentiometers. YIHUA 852D+
8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
32-channel logic analyzer with a sampling frequency of 500 MHz. It can decode data under most popular communication protocols. Works with Windows, Linux and Mac OS systems. LA5032
Module with a button and green LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-16842
GPS module with 72-channel GNSS NEO-M8U receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. Built-in accelerometer and gyroscope. SparkFun GPS-16329