

zł166.16 tax excl.
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A set with a 2 DOF control platform designed for minicomputers Raspberry Pi, Nvidia Jetson Nano and Xavier NX. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions, making 180-degree movements horizontally and vertically. A dedicated board with a 12-bit PWM controller was used to control the servos, located in the lower base of the platform. Full documentation with assembly instructions is available on the product page.
Digital Servo GH-S37D
Control Board
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has DDR4 8GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. 945-83518-0005-000
No product available!
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227
No product available!
The Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074
No product available!
CAMDENBOSS CBRPC-CLR Dev Board Enclosure, Raspberry Pi Camera, Polystyrene, Transparent
No product available!
Expansion module for the OpenMV Cam M7 camera. The board has connectors compatible with the Gravity standard. It has digital, analog, serial and I2C pins. DFRobot DFR0578
A set of cameras designed for artificial intelligence projects (two 720p and one 12 MPx) configured via USB. ArduCAM OAK-D
No product available!
A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
Base plate designed for Luxonis BW1099 DepthAI SoM modules. It has three interfaces for connecting cameras with a 26-pin connector. ArduCAM B0327
No product available!
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
The Arducam CS to M12 adapter allows you to use M12 or CS lenses with the Raspberry Pi HQ camera module, providing a wide range of optical options. ArduCam UB0225
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12"
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
Adapter designed for cameras with a parallel interface. It allows you to connect the camera with the USB Camera Shield module and connect it to a computer via a USB port. ArduCAM B0345
A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283