- Out-of-Stock
ArduCAM USB2 Camera Shield (Rev.E) - USB module for cameras with parallel and MIPI interface
ID: 587014
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
Description
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. It has a 16MB built-in hardware framebuffer so it provides good data throughput. In addition, thanks to the built-in buffer, it supports the synchronized operation of multiple cameras processing images at the same time. It can work with both PCs and embedded systems, min. Raspberry Pi, Odroid, Beaglebone Black, Nvidia Jetson TK / TX.
Features
- Support for cameras with MIPI interface
- Supports cameras with 8/12-bit parallel interface
- Support for x86, ARM 32 / 64bit hardware platforms
- Windows, Linux support
- Fully customizable, easy to transfer to another hardware platform
- Free binary SDK library and demo software source code
- Bandwidth: 480Mbps USB2.0
- I/O voltage standard: 3.3V
- Connector: Micro-USB2.0
- Built-in 16 MB frame buffer
- Power consumption: 5V / 300mA
- Working temperature: -10 ℃ to 55 ℃
- Size: 40 x 40mm
- Weight: 20g
Kit contains
- ArduCAM USB2 Camera Shield (Rev. E)
- MicroUSB cable
- Adapter FPC 15-pin 1 mm to 22-pin 0.5 mm 150 mm
- FPC 22-pin tape 0.5 mm 80 mm
587014
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Camera module based on CMOS AR0134 matrix with a resolution of 1280x960 px (1.2 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0110
zł457.77
24h
Available quantity: 1
Available
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109
zł306.73
24h
Available quantity: 1
Available
Camera module with 5 MPx matrix, autofocus and CMOS sensor with JPEG output. Based on the Omnivision OV5640 image sensor. ArduCAM B0158
zł141.55
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing
Retired
No product available!
A small Li-Pol battery with a nominal voltage of 3.7 V and a capacity of 1350 mAh. Leaded wires, dimensions: 5 x 37 x 59 mm. Akyga LP503759
Retired
No product available!
Thermistor for THT assembly with a resistance of 10k, a temperature coefficient of 3380K and accuracy of 1%. The sensor body is Ø2.5x4mm
Delivery date unknown
No product available!
KAmduino UNO is a development board with functionality and dimensions typical for Arduino UNO. Thanks to the built-in ATmega328P microcontroller and the FT231X chipset, the board can be programmed via a USB interface using the Arduino environment. KAmduino UNO
Retired
No product available!
K64 microcontroller with ARM® Cortex®-M4 core, 1MB Flash memory, 256kB RAM, 120MHz, SPI, I2C, I2S, UART, CAN, USB OTG, ADC, DAC, RTC, DMA, LQFP100
Retired
No product available!
SmartLED Shield driver (V4) for SmartMatrix series displays, for use with Teensy 3.2, Teensy 3.5 and Teensy 3.6. It is also possible to connect LED Dotstar or APA102 displays. Adafruit 1902
Retired
No product available!
Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors: 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope. Adafruit 2020
Retired
No product available!
Ambient Light Sensor, SI1145, connects to the I2C bus pads. Adafruit 1981
Retired
No product available!
Extension for Raspberry Pi; communication module with RS-485 interface (DEV-13000). Module with the possibility of mounting the DB-9 socket, the socket should be purchased separately
Retired
No product available!
FreeSoC2 board has two processors on-board: a CY8C5868LTI-LP039 and a CY8C5888AXI-LP096. The former serves as a debugger/programmer for the latter, which is the target upon which your application code will be installed. Both parts contain a Cortex-M3 processor core, 256kB of flash memory, 64kB of SRAM, and 2kB of EEPROM. DEV-13229
Retired
No product available!
32-bit microcontroller with ARM Cortex-M4 core, XMC4200 family, 256kB Flash, VQFN-48, Infineon
Retired
No product available!
Aluminum extensometer beam, allowing measurement of weight up to 1 kilogram. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
Aluminum extensometer beam, allowing weight measurement up to 3 kilograms. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
Aluminum extensometer beam, allowing mass measurement up to 5 kilograms. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
The set allows introducing distance, ambient lighting and gesture analysis into the subject using the VL6180X sensor. NUCLEO-L053R8 plate in set with VL6180X expansion board. P-NUCLEO-6180X2
Retired
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175