.png)
- Out-of-Stock
ArduCAM CMOS MT9V022 1/3-Inch 0.36MP Monochrome Camera - module with 0.36MP MT9V022 camera
ID: 586995
5906623404353
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109
Description
Monochrome camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Supports 752x480 @ 60fps video recording, has global snapshot and HDR support. It communicates via a parallel interface and is intended for use with the ArduCAM USB Shield or USB3.0 Camera Shield module. It is equipped with a LS-6020 lens with a focal length of 6 mm, a viewing angle of 60°, an F2.2 aperture and a 1/3" format.
Features
- Intended for use with the ArduCAM USB Shield or USB3.0 Camera Shield module
- Matrix: MT9V022 (CMOS)
- Resolution: 752x480 px (0.36 MPx)
- Snapshot type: Global Shutter
- Video recording: 752x480 pixels @ 60 FPS
- Pixel size: 6.0 x 6.0 um
- Sensitivity: 4.8V / lux-sec
- Parallel interface
- The LS-6020 lens
- Focal length: 6 mm
- Aperture: F2,2
- Viewing angle: 60°
- Format: 1/3 ''
- Mounting M12
- Power supply: 3.3 V
- Four mounting holes
- Camera module dimensions: 40 x 40 mm
586995
Data sheet
- Resolution
- 0.3MPx
- Interface
- Parallel
- Sensor
- MT9V022
- IR filter
- Yes
- Lens assembly
- M12
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
zł467.78
Delivery date unknown
No product available!
Set with a 48 MP camera equipped with an IMX586 sensor. Equipped with digitally controlled focus. Included with a USB 3.0 adapter and cable. ArduCAM EK032
zł2,099.00
Delivery date unknown
No product available!
Other products in the same category (16)
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
Retired
No product available!
e-Paper display controller module with a standard Arduino connector. It has a built-in MX25R6435F Flash memory with a capacity of 8 MB and a 24-pin FFC connector dedicated to e-Paper displays. Waveshare e-Paper Shield (B)
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 2 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
Matte PET-G filament, black, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G Black
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 300 x 300 x 400 mm and uses a fully metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Plus
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Plus
Retired
No product available!
Linear, programmable DC benchtop power supply with three independent, galvanically isolated outputs, providing a total power of 220 W. It offers two fully adjustable 0-32 V channels and an additional fixed 2.5 V/3.3 V/5 V output for flexible applications. A 4.3-inch color TFT display allows for clear, real-time monitoring of voltage, current, and waveforms. Support for independent, serial, and parallel modes, as well as remote control via USB and LAN, make it a versatile tool for electronics design and test. The Siglent SPD3303X-E
Retired
No product available!
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109