

zł65.84 tax excl.
Camera with OV7251 CMOS sensor with a resolution of 640x480 px. Equipped with a snapshot, it communicates via 1-lane MIPI interface. ArduCAM U6070-1
Camera with OV7251 CMOS sensor with a resolution of 640x480 px. It allows you to record video at resolutions 640x480 at 100fps. The built-in lens has a D85.6 °, H72.9 °, V57.7 ° angle of view. The camera uses the Omnipixel3-GS technology, which involves simultaneous exposure of all pixels and reading them line by line, ensuring stable, fast imaging. The camera communicates via the 1-lane MIPI interface and supports the RGB RAW 10-bit output format. At the end of the tape there is a 24-pin BBR43-24KB533 connector for connecting the camera to the main module. The camera can be used in phones, tablets, cameras and digital cameras.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Camera with a monochrome CMOS OV9281 sensor with a resolution of 1280x800 px. Equipped with a snapshot, it communicates via the 2-lane MIPI interface. ArduCAM U6072
No product available!
Camera with OV7251 CMOS sensor with a resolution of 640x480 px. Equipped with a snapshot, it communicates via 1-lane MIPI interface. ArduCAM U6070
Camera module with 5MP USB interface and IMX335 sensor. Equipped with manual focus. Waveshare IMX335 5MP USB Camera (A)
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Set with a camera with a resolution of 18 MPx with an AR1820HS sensor, a USB 2.0 adapter and a cable. ArduCAM EK017
Camera with OV9282 sensor designed for DepthAI OAK modules. The set includes a lens and an adapter. ArduCAM B0297
No product available!
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
Camera with OV9282 sensor designed for DepthAI systems. Without IR filter. It is a replacement element for DepthAI OAK-D modules. ArduCAM B0299
Official camera module set to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Raspberry Pi SC0872
Camera module with OV5647 5MP sensor dedicated to Raspberry Pi. Designed for 3D printing monitoring systems. Without IR filter. ArduCAM B003301
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Camera module with IMX519 sensor dedicated to Raspberry Pi minicomputers. It uses a 16 MP matrix and allows you to record video in resolutions of 1080p@30fps. ArduCAM B0371
Camera module with OV5640 sensor with a resolution of 5 MPx. It features a 120° viewing angle lens and communicates via a parallel interface. Adafruit 5673
8 Mpx camera module with IMX219 sensor with low distortion lens. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0184
1/4 Inch 5 Megapixels Sensor Spy Camera Module with Flex Cable for Raspberry Pi. ArduCAM B0066
Camera module with MT9D111 matrix with a resolution of 2 MPx and size 1 / 3.2 ". The transmission speed in JPEG format at full resolution of 1600 x 1200 pixels is 15 fps. It is equipped with a CS mount lens with parameters: 3MP, 1: 1.4, focal length 4.0 mm , format 1 / 2.5 \'\'. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0009
Camera with OV7251 CMOS sensor with a resolution of 640x480 px. Equipped with a snapshot, it communicates via 1-lane MIPI interface. ArduCAM U6070-1