A set with a camera and a USB 2.0 adapter that allows you to connect the module via a USB connector. The camera is equipped with an AR1820HS sensor with an 18 MPx matrix and allows you to record video at a resolution of 4912Hx3684V@24 fps. It is perfect for demanding applications such as microscopes, medical devices and UAVs.
USB2 Camera Shield (Rev.E) is a module with a USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. It has a 16MB built-in hardware framebuffer so it provides good data throughput. In addition, thanks to the built-in buffer, it supports the synchronized operation of multiple cameras processing images at the same time. It can work with both PCs and embedded systems, min. Raspberry Pi, Odroid, Beaglebone Black, Nvidia Jetson TK / TX.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Set with a camera with a resolution of 18 MPx with an AR1820HS sensor, a USB 2.0 adapter and a cable. ArduCAM EK017
No product available!
Adapter designed for cameras with a parallel interface. It allows you to connect the camera with the USB Camera Shield module and connect it to a computer via a USB port. ArduCAM B0345
Set with a 48 MP camera equipped with an IMX586 sensor. Equipped with digitally controlled focus. Included with a USB 3.0 adapter and cable. ArduCAM EK032
No product available!
A compact 5MP SPI camera module based on the OV5642 image sensor, designed for microcontrollers and embedded platforms. It enables high-quality JPEG image capture, supports multiple cameras on a single MCU, and allows short video recording, making it ideal for IoT, robotics, and battery-powered applications.. ArduCAM B0068
1/4 Inch 5 Megapixels Sensor Spy Camera Module with Flex Cable for Raspberry Pi. ArduCAM B0066
5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
1/9" CMOS VGA (640x480) image sensor with OmniPixel3-HS™ technology. ArduCAM B0070
OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182
Infrared Camera Module. ArduCAM B0059
No product available!
Camera module with MT9D111 matrix with a resolution of 2 MPx and size 1 / 3.2 ". The transmission speed in JPEG format at full resolution of 1600 x 1200 pixels is 15 fps. It is equipped with a CS mount lens with parameters: 3MP, 1: 1.4, focal length 4.0 mm , format 1 / 2.5 \'\'. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0009
New 5MegaPixel AutoFocus CMOS camera module with JPEG output. The camera module is based on Omnivision OV5640 image sensor and can be used with ArduCAM shields and other platforms like Freescale i.MX6 develop board. ArduCam U3183
ArduCam OV5642 5 MPx camera module with OV5642 matrix. Resolution: 2592 x 1944 pixels (5 MPx), pixel size: 1.4 x 1.4 μm, built-in JPEG encoder - operating in real time. B0019
Camera module with an OV5642 matrix with a resolution of 5 MPx and a size of 1/4 "with output in JPEG format. The transmission speed in the full resolution of 2592 x 1944 pixels is 15 fps. It is equipped with an M12x0.5 1/4 \'\' lens. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0020
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
Monochrome camera module 10 Mpx with sensor MT9J001 / MT9J003 designed for use with the ArduCam USB Shield module. Lens LS-18023M12. Support for video recording 1080p @ 30fps and VGA @ 60fps. Arducam 10MP: MT9J001 / MT9J003
Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0103
No product available!
Set with a camera with a resolution of 18 MPx with an AR1820HS sensor, a USB 2.0 adapter and a cable. ArduCAM EK017