ArduCAM B0161 OV7251 MIPI 0.31MP - monochrome camera module for Raspberry Pi
ID: 576985
5906623403189
zł150.85
Tax included
zł122.64 tax excl.
0.31 Mpx camera module with OV7251 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 640×480 pixels. ArduCAM B0161
Description
0.31 Mpx camera module with OV7251 sensor cooperating with all versions of Raspberry Pi. The sensor used has a matrix with a resolution of 0.31 Mpx and allows video recording at resolutions of 640×480/135fps, 640×240/204fps, 640×120/240fps and 320×240/204fps. The module is attached to the Raspberry Pi via a dedicated socket located on the upper side of the board. It uses the MIPI CSI-2 interface specially developed for cooperation with cameras. The set with the camera includes a 15-pin tape for connecting the camera to the Raspberry Pi model B and A, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Features
- Works with all versions of Raspberry Pi (Raspberry Pi 4 model B, Raspberry Pi 3 model B+, Raspberry Pi 3 model B etc.)
- Sensor: Monochrome global shutter OV7251
- Pixel Size: 3 μm x 3 μm
- Active array size: 640*480
- Optical Size: 1/7.5 inch
- EFL: 1.
- F.NO: 2.2
- Built-in IR cut filter: 650nm
- FOV: D86.5 Deg./H72.9 Deg./V57.7 Deg.
- Focusing Range: 65mm ~ infinite
- Output interface: 1-lane MIPI serial output
- Output formats: 8/10-bit BW RAW
- Maximum image transfer rate: 640 x 480: 100 fps
- Board Size: 40mm x 40mm
Kit contains
- Arducam OV7251 MIPI 0.31MP Monochrome Global Shutter Camera Module
- 150mm 15pin 1.0mm FPC cable
- 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
576985
Data sheet
- Resolution
- 640 x 480 px
- Interface
- MIPI CSI-2
- Sensor
- OV7251
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 494
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 208
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 21
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł3.03
24h
Available quantity: 23
Available
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
zł61.06
24h
Available quantity: 6
Available
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
zł16.90
24h
Available quantity: 15
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 179
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Regular pricezł340.57zł338.00
Delivery date unknown
No product available!
Other products in the same category (16)
The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0152
zł178.17
4 weeks
No product available!
The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154
zł198.57
24h
Available quantity: 1
Available
The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0153
zł225.90
4 weeks
No product available!
The camera set with the Sony IMX219 sensor allows you to remotely rotate the camera, control the angle of inclination and zoom. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B01678MP
zł519.79
24h
Available quantity: 1
Available
Camera for Raspberry Pi CM3, CM3+ and NVIDIA Jetson Nano. It was equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Waveshare IMX477 12.3MP Camera
zł304.54
4 weeks
No product available!
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
zł1,161.45
4 weeks
No product available!
A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266
zł1,030.92
4 weeks
No product available!
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
zł1,544.72
4 weeks
No product available!
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265R
zł1,520.59
4 weeks
No product available!
Camera set with AR1335 sensor with 13 MPx matrix, allows for remote camera rotation, tilt angle and zoom control. Works with Raspberry Pi minicomputers. Swivel base included. ArduCAM B0167B13
zł1,308.84
4 weeks
No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and RPi Compute Module. The camera is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 162°. Waveshare IMX219-160 IR-CUT Camera
zł113.50
24h
Available quantity: 1
Available
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
zł341.24
4 weeks
No product available!
Set with HQ camera, USB cable, lens and tripod. Compatible with UVC, works with Raspberry Pi, Android devices and PC. ArduCAM B0288
zł1,054.71
24h
Available quantity: 2
Available
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
Regular pricezł60.73zł45.76
24h
Available quantity: 3
Available
Module with IMX298 sensor that works with all versions of the Raspberry Pi. The sensor used has a 16 MP matrix and allows video recording at resolutions 4640x3472/10fps. ArduCAM B0323
zł395.69
24h
Available quantity: 2
Available
The module with the IMX230 sensor, working with all versions of the Raspberry Pi. The sensor used has a matrix of 21 MP and allows you to record video at resolutions of 5344x4012/9fps. ArduCAM B0324
zł418.97
24h
Available quantity: 1
Available
0.31 Mpx camera module with OV7251 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 640×480 pixels. ArduCAM B0161