zł168.43 tax excl.
The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s. B0036
The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s.
The Raspberry Pi camera module has been used for many things such as a security camera, for time lapse photography and even sent high up into the atmosphere on a weather balloon.
With the wide range of project Raspberry Pi’s are being used for, some users were finding that the camera was no good when it was being used in low light with an Infrared light source. Unfortunately for them the Raspberry Pi camera module has a Infrared filter built in which makes it unusable for their project. In response we come up with a camera module just for these type of projects called the Pi NoIR camera. It is the same as the standard camera module but without an IR filter.
Without the Infrared filter the camera can be used for night time photography, night time security or for any project where the scene will be lit by an IR light. Without a filter the camera sensor can see short wavelength IR light around 800nm which is the IR wavelengths not generated with heat but just beyond the visible red light in the spectrum.
The camera has the same specifications as the standard camera module but has a black circuit board so it can be told apart from the standard green camera board.
Package content:
Note: Raspberry Pi NOT INCLUDED
High-Definition video camera for Raspberry Pi Model A or B
Omnivision 5647 sensor in a fixed-focus module with replaceable Lens
Lens holder: M12x0.5 or CS Mount
5MPixel sensor
Removed IR filter
Still picture resolution: 2592 x 1944
Max video resolution: 1080p
Max frame rate: 30fps
Size: 36 x 36 mm
Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
High-Definition video camera for Raspberry Pi Model A or B
Omnivision 5647 sensor in a fixed-focus module with replaceable Lens
Lens holder: M12x0.5 or CS Mount
5MPixel sensor
Removed IR filter
Still picture resolution: 2592 x 1944
Max video resolution: 1080p
Max frame rate: 30fps
Size: 36 x 36 mm
Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Mini module Camera Shield w/2 MP OV2640 for Arduino UNO Mega2560 board. ArduCam B0067
Mini module Camera Shield w/5 MP OV5642 for Arduino UNO Mega2560 board. ArduCAM B0068
1/4 Inch 5 Megapixels Sensor Spy Camera Module with Flex Cable for Raspberry Pi. ArduCAM B0066
5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
No product available!
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001
Module with OV5647 sensor working with Raspberry Pi. It uses a built-in motorized IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003504
Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS IMX291 sensor with 160° Fisheye lens and microphone. ArduCAM B0202
No product available!
The SA36NA30P sensor with a wide-angle lens and no IR filter allows for the capture of images in the full light spectrum, including infrared, making it suitable for night vision systems and research applications
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
M12 mount lens. It has a focal length of 8 mm mm and an FoV viewing angle of 69.5°. It is designed to work with the Raspberry Pi HQ camera M12. Waveshare WS0698012
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
Raspberry Pi Camera Module, Fixed-focus, 5 megapixel OV5647 sensor in a fixed-focus module. Waveshare RPi Camera (D)
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
A wide-angle camera designed for the Raspberry Pi, offering 3280 x 2464 resolution and compatibility with a wide range of models, including the Pi 5, 4B, and Zero 2W. Equipped with a Sony IMX219 sensor and an M12 lens, it captures a wide field of view, making it ideal for surveillance, autonomous vehicles, and astrophotography. The camera features good image quality, easy installation, and low power consumption, making it easy to integrate into DIY projects and professional vision systems. ArduCAM B0392
The Arducam B0210 set includes three flexible ribbons with lengths of 38 mm, 73 mm, and 150 mm, designed for connecting camera modules to Raspberry Pi Zero and Zero 2W. Each ribbon features a 15-pin connector with a 1.0 mm pitch on one end and a 22-pin connector with a 0.5 mm pitch on the other, ensuring compatibility with official V1, V2, and HQ cameras, as well as most Arducam modules.
The IMX378-79 camera module features a Sony 12.3 MP (4056x3040 px) sensor with a 79° viewing angle, ideal for industrial and inspection applications requiring the highest image quality. With MIPI-CSI-2Lane interface, Raspberry Pi compatibility and low distortion, it provides smooth and precise image capture. DFRobot SEN0632
The module with the IMX219 camera with a resolution of 8 MP. It has a viewing angle of 62° and a built-in IR filter. ArduCAM B0390
No product available!
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-300mm
The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s. B0036