Kit with a 7.5" e-Paper display with passive power supply via NFC and an NFC module based on the ST25R3911B chip and the STM32F103RCT6 microcontroller. The display is enclosed in a lightweight case that protects against mechanical damage. No batteries required, and the transfer of displayed data and power during transfer is possible thanks to the NFC technology.
The NFC module has a built-in microSD card slot, on which the user can store graphics and then send them to the display using wireless technology. It is also equipped with an OLED display, function buttons, a microUSB socket and a USB-UART converter.

| 1. STM32F103RCT6 | 8. 2 x LED indicator |
| 2. NFC chip ST25R3911B | 9. MCU pins |
| 3. SRAM 23LC1024, 1 MBit | 10. microUSB |
| 4. USB-UART converter CR2102 | 11. microSD |
| 5. 3,3 V voltage regulator SPX3819 | 12. SWD interface |
| 6. OLED 1,3" display | 13. NFC coil |
| 7. 4 buttons | 14. UART |
The displayed image can be also sent using a mobile device with the NFC function (the manufacturer provides the module with an application enabling data transfer to the display in a simple and convenient way). Full documentation with examples of use is available on the product Wiki page.
Data sheet
Manufacturer
Responsible person
Waveshare 31063 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, equipped with a Raspberry Pi HAT+ compatible driver board and SPI interface. Waveshare 3.97inch e-Paper HAT+
No product available!
3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)
3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The panel is designed for use with an external driver board or controller supporting the SPI interface. Waveshare 3.5inch e-Paper (G)
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)
3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)
No product available!
3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)
No product available!
5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper
No product available!
5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT
No product available!
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602
Development kit featuring a 13.3" full-color E-Paper display with 1600 × 1200 px resolution and an ESP32-S3-based driver board. Utilizes E Ink Spectra 6 (E6) technology, supports 2.4 GHz WiFi and Bluetooth LE, and includes a TF card slot, audio codecs, and a Li-Ion battery charging circuit. Waveshare ESP32-S3-ePaper-13.3E6
No product available!
Programmable module with a 6-inch 800 × 600px e-paper display supporting black-and-white mode, 8 grayscale levels and partial refresh. Based on ESP32-WROVER with WiFi and Bluetooth, it also provides microSD, RTC, Qwiic/easyC and USB-C connectivity. Version with enclosure and 1200mAh Li-Ion battery. Soldered 333229
Programmable 5.65" color e-paper module with a 600 × 448px AC057TC1 display supporting 7 colors. Based on ESP32-WROVER with WiFi and Bluetooth, it includes microSD, RTC, USB-C, easyC / Qwiic and a 3.7V 1200mAh Li-Ion battery with a 3D-printed enclosure. Soldered 333231
Programmable module with a large 9.7-inch 1200 × 825px e-paper display, based on ESP32 with WiFi and Bluetooth. It supports grayscale and partial refresh, and provides microSD, RTC, Qwiic, USB-C, Arduino and MicroPython support. Version with enclosure and 3000mAh Li-Ion battery. Soldered 333247
Programmable 6" 1024 × 758px touchscreen e-paper module based on ESP32 with WiFi and Bluetooth. Features two-point capacitive touch, 64-step frontlight control, microSD, RTC, Qwiic/easyC and support for Arduino, MicroPython and ESP-IDF. Version with enclosure and Li-Ion battery. Soldered 333320
Set with a 7.5" e-Paper display with passive power via NFC, NFC module and microSD card. Waveshare 7.5inch NFC e-Paper Eval Kit