Electroluminescent (EL) Panel Starter Pack - 10cm x 10cm Aqua

The PN7120A0EV/C10801Y is an advanced NFC controller from NXP, operating at a frequency of 13.56 MHz and compatible with protocols such as FeliCa, ISO 14443, ISO 15693, ISO 18000, and MIFARE. With its I2C interface and supply voltage range of 1.65 V to 3.6 V, it is perfectly suited for integration into various electronic systems, enabling the implementation of NFC functionality in applications requiring proximity communication.

The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097

KAmodM41T82 is a module with the STMicroelectronics M41T82 RTC clock. The chip allows precise timing, and an additional battery connector allows you to maintain the power supply when the main power is turned off. Communication with the module is realized via I2C bus.

3-pin ARK mounting strip, 7.5 mm pitch. 128-7.5-03P-14-00A(H)

Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 3.5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0283

Shield - Xbee w / o RF module

GSM antenna, male SMA connector, 900&1800MHz, RoHS

BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136

Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613

LED strip with addressable RGB WS2815 diodes on a white PCB. It is powered by 12 V DC, has a length of 1 m and 144 LEDs/m. Protection level IP67

MSW0132 is a set of 10 miniature slide switches MSS-22D18, featuring a DPDT (Double Pole Double Throw) configuration and a rated current of 50 mA at 12 V DC. These switches are designed for PCB mounting, ensuring reliable performance in compact electronic projects.

Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25466

The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%

Panel button, monostable, rectangular, dimensions 16 x 22 mm and SPDT contact configuration

Connector for connecting a 40-pin tape with a 0.5 mm pitch to a printed circuit board. Riverdi ZIF0540DH-CF25