ESP32-S3 Type B development board with 4.3″ touch LCD 800×480 and enclosure - Waveshare 28141
ID: 1197413
5902186321397
zł201.14
Tax included
zł163.53 tax excl.
ESP32-S3-Touch-LCD-4.3B-BOX is a fully integrated development solution for HMI systems, featuring an IPS touchscreen display, advanced peripheral support, and a compact enclosed design. With flexible mounting and communication options, along with wide-range power input, it is ideally suited for automation, industrial controllers, and smart user interfaces.
Description
The ESP32-S3-Touch-LCD-4.3B-BOX is a complete version of the ESP32-S3 development board with a 4.3-inch IPS display and a capacitive 5-point touchscreen, enclosed in a sleek, dedicated plastic housing. The device integrates the ESP32-S3 microcontroller with a dual-core Xtensa LX7 processor (up to 240 MHz), 8 MB of PSRAM, and 16 MB of Flash memory, along with support for 2.4 GHz Wi-Fi and Bluetooth 5 LE.
The board supports advanced communication interfaces (CAN, RS485, I2C, USB) and opto-isolated digital inputs and outputs. With GUI support (e.g. LVGL) and a wide voltage input range of 7–36 V, it is suitable for automation, user interfaces, embedded systems, and as an HMI control panel. The enclosure supports wall mounting, DIN rail installation, or monitor arm mounting (75 mm VESA), and offers an option for battery power (3.7 V battery socket).
Specifications
- Processor: Xtensa 32-bit LX7 dual-core, up to 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 16 MB Flash, 8 MB PSRAM
- Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 5 LE
- Display: 4.3" IPS, 800×480, tempered glass, 160° viewing angle
- Touch panel: capacitive, 5-point, I2C interface
- Enclosure: plastic, supports wall and VESA (75 mm) mounting
- Interfaces: CAN, RS485, I2C, USB, TF card slot
- Digital inputs: 2×, 5–36 V, passive/active (NPN/PNP), opto-isolated
- Digital outputs: 2×, 5–36 V, open collector, up to 450 mA per channel
- LED indicators: PWR, CHG, DONE
- RTC with battery backup
- Li-Ion battery socket 3.7 V (MX1.25) – not included
- Power supply: USB-C 5 V, DC terminal 7–36 V
- Dimensions: 116.3 × 79 mm
1197413
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł36.22
24h
Available quantity: 81
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł49.47
24h
Available quantity: 5
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł50.45
24h
Available quantity: 10
Available
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł201.25
24h
Available quantity: 5
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł36.69
24h
Available quantity: 9
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
24h
Available quantity: 2
Available
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł227.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł64.89
24h
Available quantity: 82
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 2
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 3
Available
ESP32-S3-Touch-LCD-4.3B-BOX is a fully integrated development solution for HMI systems, featuring an IPS touchscreen display, advanced peripheral support, and a compact enclosed design. With flexible mounting and communication options, along with wide-range power input, it is ideally suited for automation, industrial controllers, and smart user interfaces.