ESP32-S3 development board with 2.8″ round display 480×480 - Waveshare 30254
ID: 1197670
5902186305045
zł148.72
Tax included
zł120.91 tax excl.
ESP32-S3-LCD-2.8C is a functional development board with a 2.8" round display without a touch panel, intended for use in HMI projects, data visualization, and IoT systems. Thanks to its extensive memory resources, rich set of interfaces, and support for popular development environments, the module is ideally suited for implementing complex graphical interfaces and portable microcontroller applications.
Description
The ESP32-S3-LCD-2.8C is a modern development board featuring the ESP32-S3R8 microcontroller with a dual-core Xtensa LX7 processor running at up to 240 MHz, supporting 2.4 GHz Wi-Fi and Bluetooth 5 LE connectivity. The integrated 2.8-inch IPS display has a resolution of 480×480 pixels and offers a wide viewing angle (160°). The board does not include a touch panel. It provides 16 MB of Flash memory, 8 MB of PSRAM, and a rich set of peripherals: USB Type-C port, TF card slot, 6-axis motion sensor QMI8658, RTC, and a lithium battery management system for 3.7 V cells. GPIO headers allow for easy integration with additional devices. The board supports ESP-IDF and Arduino IDE, making it suitable for developing graphical and IoT applications.
Features
- Processor: Xtensa 32-bit LX7 dual-core, up to 240 MHz
- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n) and Bluetooth 5 LE
- Memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB Flash
- Display: 2.8" round IPS, 480×480 resolution, 1200:1 contrast, 160° viewing angle
- Driver: ST7701, RGB interface
- Sensor: QMI8658 – 6-axis IMU (accelerometer + gyroscope)
- RTC: PCF85063, RTC battery interface
- TF card slot, MX1.25 connector for 3.7 V lithium battery
- USB Type-C for power, programming, and debugging
- 12 programmable I/O pins, UART and I2C interfaces
- Indicator LEDs for power and charging, buzzer
- Development support: ESP-IDF and Arduino IDE
Included
- ESP32-S3-LCD-2.8C x1
- SH1.0 12PIN cable ~100 mm x1
- SH1.0 4PIN cable ~100 mm (2 pcs) x1
1197670
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł35.81
24h
Available quantity: 102
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł49.47
4 weeks
No product available!
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł50.45
4 weeks
No product available!
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł201.25
24h
Available quantity: 5
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł37.72
24h
Available quantity: 26
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
4 weeks
No product available!
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł230.77
4 weeks
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł67.12
4 weeks
No product available!
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 2
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 2
Available
ESP32-S3-LCD-2.8C is a functional development board with a 2.8" round display without a touch panel, intended for use in HMI projects, data visualization, and IoT systems. Thanks to its extensive memory resources, rich set of interfaces, and support for popular development environments, the module is ideally suited for implementing complex graphical interfaces and portable microcontroller applications.