ESP32-P4 development board Smart 86 Box with touch panel, WiFi and Bluetooth - Waveshare 31416
ID: 1198463
5902186322523
zł190.22
Tax included
zł154.65 tax excl.
ESP32-P4-WIFI6-Touch-LCD-4B is a control panel with a 4″ IPS display, Wi-Fi 6 and Bluetooth 5 support, 5-point touch, and advanced audio capabilities, designed for smart installations, HMI, and IoT devices. The module supports the development of interactive user interfaces in modern automation systems.
Description
The ESP32-P4-WIFI6-Touch-LCD-4B development board features a 4″ IPS touchscreen with a 720×720 resolution, designed for creating modern control panels and user interfaces in IoT applications and HMI systems. It is based on the ESP32-P4 chip with 32-bit RISC-V cores and integrates the ESP32-C6 module for Wi-Fi 6 and Bluetooth 5 (LE) connectivity. Equipped with 32 MB PSRAM and 32 MB Flash memory, the board offers a wide range of peripherals, including MIPI-CSI interface, USB 2.0 OTG port, speaker connector, two microphones with echo cancellation, TF card reader, and UART interface. The 5-point capacitive touch enables intuitive panel operation. The device supports voice interaction and is compatible with AI platforms. It is designed for installation in a standard 86 mm wall box.
Features
- Display: IPS, 4″, 720×720 px
- Touch type: capacitive, 5-point (GT911)
- Brightness: 400 cd/m²
- Contrast: 1200:1
- Viewing angle: 170°
- Processor: ESP32-P4 (RISC-V, dual-core + single-core)
- Wireless communication: ESP32-C6-MINI (Wi-Fi 6, Bluetooth 5 LE, SDIO interface)
- Memory: 32 MB PSRAM + 32 MB NOR Flash
- Ports: USB 2.0 OTG, UART (USB-C), TF card slot (SDIO 3.0)
- Audio: ES8311 codec, 2× microphones (with EC, ES7210 chip), speaker connector
- Interfaces: MIPI-CSI, I²C, GPIO, RTC, BOOT and RESET buttons
- Enclosure dimensions: 86.5 × 86.5 mm
- Display area: 71.93 × 71.93 mm
- Mounting: compatible with 86-type electrical wall box (recommended depth ≥33 mm)
1198463
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Compact M5Stack series development kit equipped with ESP32 Pico. It is based on a loudspeaker, I2S amplifier and a microphone. It will work in IoT-related projects, as a portable Bluetooth speaker or a voice-controlled device. M5Stack C008-C
zł71.91
24h
Available quantity: 3
Available
MicroMod main module with ESP32 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun WRL-16781
zł103.90
3 weeks
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.29
24h
Available quantity: 8
Available
A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules
zł2.58
24h
Available quantity: 33
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
zł154.62
3 weeks
No product available!
Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32
zł76.09
24h
Available quantity: 4
Available
Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"
zł64.89
24h
Available quantity: 2
Available
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
zł117.93
24h
Available quantity: 2
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
4 weeks
No product available!
Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One
zł60.52
24h
Available quantity: 1
Available
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
Regular pricezł194.99zł166.10
24h
Available quantity: 1
Available
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3
Regular pricezł244.91zł208.57
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
zł48.89
24h
Available quantity: 3
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
zł53.96
24h
Available quantity: 2
Available
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
zł26.94
4 weeks
No product available!
ESP32-P4-WIFI6-Touch-LCD-4B is a control panel with a 4″ IPS display, Wi-Fi 6 and Bluetooth 5 support, 5-point touch, and advanced audio capabilities, designed for smart installations, HMI, and IoT devices. The module supports the development of interactive user interfaces in modern automation systems.