zł77.20 tax excl.
This development board, based on the ESP32-C6 RISC-V microcontroller, combines high performance with energy efficiency. Equipped with a dual-core processor running at up to 160 MHz, it supports modern connectivity standards such as Wi-Fi 6, Bluetooth 5.3 LE, Zigbee, and Thread, making it an excellent platform for IoT projects and intelligent systems. The module features 8 MB of flash memory, a USB-C connector with short-circuit protection, and a LiPo battery charging circuit with voltage monitoring. TinyC6 ESP32-C6
TinyC6 is a modern development board based on the ESP32-C6 module and RISC-V architecture, offering exceptional performance, energy efficiency, and versatility in a compact form factor. Equipped with a dual-core RISC-V processor, combining high performance up to 160 MHz with low power consumption in eco mode (20 MHz), the module is an ideal solution for projects that require both computing power and energy efficiency.

The board supports the latest connectivity standards, including Wi-Fi 6 (802.11ax), Bluetooth 5.3 LE with Mesh support, as well as Zigbee and Thread (802.15.4), making it an excellent platform for IoT systems, smart home devices, and industrial applications. With built-in 8 MB QSPI Flash memory and an integrated 3.3 V regulator rated at 700 mA, it ensures reliable operation across a wide range of use cases. The module is equipped with a USB-C connector featuring reverse-voltage protection, ensuring safety during power supply and programming. The board also includes JST pads for connecting a LiPo battery, along with a built-in charging circuit and voltage monitoring for VBAT as well as 5 V presence detection.
The TinyC6 offers 17 GPIO pins enabling communication through UART, JTAG, SPI, I2C, and other interfaces. Additionally, the board includes an RGB LED as well as dedicated Power (red) and Charge (orange) LEDs indicating power and charging status. The optimized design allows for low power consumption in sleep mode, making the device ideal for battery-powered systems. The module is compact and easy to integrate into existing projects. It is fully compatible with earlier TinyPICO, TinyS2, and TinyS3 models, allowing for seamless project and code migration without hardware changes.

Manufacturer
Responsible person
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
The ESP32-PICO-MINI-02 development board features a dual-core 240 MHz Xtensa processor, 8 MB of Flash, and 2 MB of PSRAM. It offers 2.4 GHz WiFi, Classic Bluetooth, and BLE connectivity, making it ideal for IoT projects. It features 20 GPIOs, 12-bit ADC, DAC, and PWM inputs, as well as SPI, I2C (STEMMA QT), I2S, and UART interfaces. It also includes a built-in NeoPixel RGB LED. It features low power consumption (approximately 10 µA in deep sleep), USB or 6V battery power, and compatibility with the Arduino IDE, CircuitPython, and MicroPython. Adafruit 5889
Development board with ESP32-S3, featuring a 7inch IPS 1024x600 display, 2.4GHz Wi-Fi and Bluetooth, CAN, RS485, I2C and USB-C interfaces, LVGL support. Waveshare ESP32-S3-LCD-7B
No product available!
Development board with ESP32-S3, featuring a 7inch IPS 1024x600 display with capacitive touch, 2.4GHz Wi-Fi and Bluetooth, CAN, RS485, I2C and USB-C interfaces, LVGL support. Waveshare ESP32-S3-Touch-LCD-7B
No product available!
Development board with ESP32-S3 and ESP32, featuring a 1.8inch IPS 360x360 display, rotary encoder, capacitive touch, 2.4GHz Wi-Fi and Bluetooth, CNC metal case, version without battery. Waveshare ESP32-S3-Knob-Touch-LCD-1.8-EN
No product available!
Development board with ESP32-S3 and ESP32, featuring a 1.8inch IPS 360x360 display, rotary encoder, capacitive touch, 2.4GHz Wi-Fi and Bluetooth, CNC metal case, built-in 3.7 V 800 mAh battery. Waveshare ESP32-S3-Knob-Touch-LCD-1.8
No product available!
Development board based on the ESP32-C6 microcontroller featuring a 1.69" IPS color display with a resolution of 240x280 px and a capacitive touch panel. The display is driven by the ST7789V2 controller, while touch input is handled by the CST816T chip. The module supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread) and includes sensors, an audio codec and a Li-Po battery charging circuit. Waveshare ESP32-C6-Touch-LCD-1.69
No product available!
Development board based on the ESP32-C6 microcontroller featuring a 1.69" IPS color display with a resolution of 240x280 px driven by the ST7789V2 controller. The board supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread) and includes built-in sensors, an audio codec and a Li-Po battery charging circuit. Waveshare ESP32-C6-LCD-1.69
Development board based on the ESP32-S3R8 microcontroller equipped with a 1.47″ IPS display with a resolution of 172 × 320 px. The module supports 2.4 GHz WiFi and Bluetooth Low Energy 5 connectivity and integrates 16 MB Flash memory and 8 MB PSRAM. The design also includes a 6-axis IMU sensor, TF card slot, and a USB Type-C connector for power supply and programming. Waveshare ESP32-S3-LCD-1.47B-M
Development board based on the ESP32-S3R8 microcontroller equipped with a 1.47″ IPS display with a resolution of 172 × 320 px. The module supports 2.4 GHz WiFi and Bluetooth Low Energy 5 connectivity and integrates 16 MB Flash memory and 8 MB PSRAM. The design also includes a 6-axis IMU sensor, TF card slot, and a USB Type-C connector for power supply and programming. Waveshare ESP32-S3-LCD-1.47B
No product available!
Waveshare 33837 development board based on ESP32-S3 with 1.46" round 412 x 412 LCD display, capacitive touch, WiFi and Bluetooth 5 support, and widened protective glass for screen protection. Equipped with IMU sensor, microphone, and speaker, designed for HMI and IoT applications. Waveshare ESP32-S3-Touch-LCD-1.46C
Waveshare 33875 development board based on ESP32-P4 and ESP32-C6 with 4.3" IPS display 480 x 800, 5-point touch, WiFi 6 and BLE 5 support, and onboard audio. Equipped with MIPI CSI camera interface and OV5647 5MP camera included, USB OTG, and 40PIN GPIO header compatible with Raspberry Pi HAT. Waveshare ESP32-P4-WIFI6-Touch-LCD-4.3-C
Waveshare 33874 development board based on ESP32-P4 and ESP32-C6 with 4.3" IPS display 480 x 800, 5-point touch, WiFi 6 and BLE 5 support, and onboard audio. Equipped with MIPI CSI camera interface (OV5647 camera not included), USB OTG, and 40PIN GPIO header compatible with Raspberry Pi HAT. Waveshare ESP32-P4-WIFI6-Touch-LCD-4.3
No product available!
Development board with ESP32-S3, 2.16" AMOLED touch display 480 x 480 px, 2.4 GHz Wi-Fi, BLE 5, dual microphones. No 3.7 V battery included. Waveshare ESP32-S3-Touch-AMOLED-2.16-EN
No product available!
Development board with ESP32-S3, 2.16" AMOLED touch display 480 x 480 px, 2.4 GHz Wi-Fi, BLE 5, dual microphones and 3.7 V battery included. Waveshare ESP32-S3-Touch-AMOLED-2.16
No product available!
Development board with ESP32-P4, featuring a 3.5″ IPS touch display (320 × 480 px), Wi-Fi 6 and Bluetooth 5 LE connectivity, and an OV5647 5 MP camera. Integrated audio, MIPI interfaces and battery support enable compact IoT, vision and AI applications. 3.7 V Li-Ion battery (MX1.25) not included. Waveshare ESP32-P4-WIFI6-Touch-LCD-3.5-EN
Development board with ESP32-P4, featuring a 3.5″ IPS touch display (320 × 480 px), Wi-Fi 6 and Bluetooth 5 LE connectivity, and an OV5647 5 MP camera. Integrated audio, MIPI interfaces and battery power support enable compact IoT, vision and AI applications. Includes a 3.7 V Li-Ion battery (MX1.25). Waveshare ESP32-P4-WIFI6-Touch-LCD-3.5
This development board, based on the ESP32-C6 RISC-V microcontroller, combines high performance with energy efficiency. Equipped with a dual-core processor running at up to 160 MHz, it supports modern connectivity standards such as Wi-Fi 6, Bluetooth 5.3 LE, Zigbee, and Thread, making it an excellent platform for IoT projects and intelligent systems. The module features 8 MB of flash memory, a USB-C connector with short-circuit protection, and a LiPo battery charging circuit with voltage monitoring. TinyC6 ESP32-C6