Grove Piezo Buzzer - module with active buzzer
ID: 564208
5906623414161
zł6.80
Tax included
zł5.53 tax excl.
Module with an active buzzer. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 107020000
Description
Module with an active buzzer with a generator. It allows you to generate a sound signal with a gain of up to 85 dB using the high state given on the SIG pin. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module is controlled by a digital signal and is supplied with the voltage from 3.3 V to 5 V. Full documentation with examples of use is available on the product page.
Features
- Interface: digital signal
- Supply voltage: 3.3 V to 5 V
- Dimensions: 20 x 20 x 10 mm
- Weight: 10 g
564208
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 26
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Module with a passive buzzer. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020109
zł12.71
Delivery date unknown
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Two-button module with 4 colored overlays. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020103
zł16.22
24h
Available quantity: 4
Available
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
zł57.91
4 weeks
No product available!
Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018
zł17.64
24h
Available quantity: 2
Available
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
zł13.16
24h
Available quantity: 2
Available
Set (5 pieces) of wires for attaching modeling servos with the Grove system. With one wire you can connect 2 servos to one Grove slot. Seeed studio 110990057
zł30.73
24h
Available quantity: 1
Available
Starter kit with Grove modules, which allows you to see the possibilities of the Azure platform. Seeed Studio 110060742
zł529.29
4 weeks
No product available!
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 2
Available
The module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
zł79.32
24h
Available quantity: 4
Available
Module with a TDS sensor that allows you to measure the total content of solids dissolved in water. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020753
zł63.78
4 weeks
No product available!
Starter kit with 10 basic Grove modules and Base Shield V2 extension designed to work with Arduino boards. The user has at his disposal a number of lessons to get to know the possibilities of the set. Seeed Studio 103030375
zł192.09
24h
Available quantity: 3
Available
Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006
zł63.39
4 weeks
No product available!
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
zł47.90
24h
Available quantity: 1
Available
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
zł11.54
24h
Available quantity: 2
Available
Module with a microswitch (limit switch). The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł25.42
24h
Available quantity: 1
Available
Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł12.52
24h
Available quantity: 2
Available
Module with real time clock (RTC) PCF85063TP and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 102020083
zł44.24
24h
Available quantity: 4
Available
Module with an active buzzer. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 107020000