Grove IMU 9DOF - module with 9-axis IMU sensor (ICM20600 + AK09918)
ID: 583194
zł62.87
Tax included
zł51.11 tax excl.
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). It allows you to perform measurements with a high resolution of 16 bits and allows you to generate interrupts. ICM20600 has an additional built-in temperature sensor. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Acceleration measurement range: ± 2g, ± 4g, ± 8g, ± 16g
- Accelerometer sensitivity factor: 16384 LSB/g@±2g, 8192 LSB/g@±4g, 4096 LSB/g@±8g, 2048 LSB/g@±16g
- Angle speed measurement range: ± 250 dps, ± 500 dps, ± 1000 dps, ± 2000 dps
- Gyro sensitivity factor: 131 LSB/(dps)@±250 dps, 65.5 LSB/(dps)@±500 dps, 32.8 LSB/(dps)@±1000 dps, 16.4 LSB/(dps)@±2000 dps
- Magnetometer measuring range: ± 4912μT
- Magnetometer sensitivity: 0.15μT
- Interface: I2C
- I2C address: 0x69, 0x68 (ICM20600), 0x0C (AK09918)
- Supply voltage: 3.3 V or 5 V
- Dimensions: 40 x 20 x 10 mm
- Weight: 9 g
Kit contains
- Grove IMU 9DOF module
- Grove cable
583194
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Module type
- 9DoF
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Akcelerometr, żyroskop i magnetometr
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł55.92
24h
Available quantity: 68
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 70
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 20
Available
Module with a 6-axis BMI088 sensor that combines an accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020584
zł158.76
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 4
Available
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
zł81.45
24h
Available quantity: 10
Available
Starter kit with 10 basic Grove modules and Base Shield V2 extension designed to work with Arduino boards. The user has at his disposal a number of lessons to get to know the possibilities of the set. Seeed Studio 103030375
zł199.00
24h
Available quantity: 2
Available
Module with a TDS sensor that allows you to measure the total content of solids dissolved in water. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020753
zł70.45
24h
Available quantity: 2
Available
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.78
24h
Available quantity: 4
Available
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030
zł35.31
24h
Available quantity: 2
Available
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
zł165.03
24h
Available quantity: 2
Available
The expansion module is designed for Arduino Nano boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100124
zł16.61
6 weeks
No product available!
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł160.67
6 weeks
No product available!
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
zł12.26
24h
Available quantity: 2
Available
The expansion module is designed for Wio Lite tiles and compatible with Adafruit Feather. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020252
zł30.81
24h
Available quantity: 11
Available
Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014
zł12.74
6 weeks
No product available!
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł65.28
24h
Available quantity: 1
Available
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617
zł38.99
24h
Available quantity: 3
Available
A set with a prototype breadboard equipped with a Grove connector. Seeed Studio 103020232
zł25.53
6 weeks
No product available!
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585