UV sensor module (C) for Raspberry Pi - Waveshare 20467
ID: 587175
5906623422623
zł42.69
Tax included
zł34.71 tax excl.
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)
Description
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. The sensor is characterized by high sensitivity, quick response and small size, which makes it easy to integrate with other devices. The system has a built-in ADC converter, and the output value is sent via the I2C interface. In addition, the user has an interrupt output with the possibility of setting the upper and lower thresholds of the current value. There is a voltage level converter on the board, thanks to which the module is compatible with 3.3 V and 5 V systems. On the Wiki website support is available in the form of examples of use with Raspberry Pi, Arduino, STM32.
Features
- LTR390-UV-01 sensor for measuring ultraviolet radiation and visible light
- Built-in ADC
- Output of the luminous intensity value through the I2C bus, I2C address 0x53
- Interrupt output, programmable upper / lower threshold
- It does not require calibration
- Built-in 3.3V / 5V voltage level converter
- Wavelength range: 280 to 430 nm
- JST PH2.0 5-pin connector
- Dimensions: 27 x 20 mm
Kit contains
- UV Sensor module (C)
- JST PH 2.0 5-pin cable
587175
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł49.90
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł65.92
24h
Available quantity: 7
Available
UV Sensor with response spectrum: 200nm-370nm
zł36.97
24h
Available quantity: 1
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
LTR390-UV UV light sensor module. Allows measurement of ultraviolet and visible light intensity. Equipped with a Gravity connector, it communicates via an I2C or UART interface. DFRobot SEN0540
zł60.80
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with color sensor TCS3472. The board is equipped with a Grove connector and communicates via the I2C interface. M5Stack U009
zł62.90
24h
Available quantity: 1
Available
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
zł21.99
24h
Available quantity: 3
Available
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
zł39.00
24h
Available quantity: 270
Available
Color sensor with a range from 8 to 16 mm. It offers 3 operating modes and can be powered with the voltage from 12 to 24 V. DFRobot SEN0506
zł225.34
24h
Available quantity: 1
Available
Crowtail – Flame Sensor 2.0 is a module detecting infrared radiation and flame sources, operating in the range of 760–1100 nm. Intended for use in safety systems, robotics, and educational projects.
zł9.43
24h
Available quantity: 5
Available
Module with three optical inspection sensors (spectrophotometers) from the AS7265x series. The module consists of three sensors; AS72651, AS72652 and AS72653 which can detect wavelengths from 410nm (UV) to 940nm (IR). SparkFun SEN-15050
zł499.39
24h
Available quantity: 1
Available
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
zł36.85
24h
Available quantity: 3
Available
Heart rate monitor module based on the popular MAX30101 chip. The board is equipped with connectors compliant with the Qwiic standard. SparkFun SEN-16474
zł186.38
24h
Available quantity: 1
Available
Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436
zł34.10
24h
Available quantity: 1
Available
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489
zł72.96
24h
Available quantity: 1
Available
ireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide light intensity measurement range from 0 to 160000 Lux. Seeed Studio 114992868
zł339.60
24h
Available quantity: 1
Available
Precise sensor measuring UV radiation in the range of 240 to 370 nm, directly outputting UV index value (0-11) and hazard level (1-5). Thanks to I2C and UART interface support and compact design, it is ideal for environmental monitoring, health protection and optimization of photovoltaic installations. DFRobot SEN0636
zł40.11
24h
Available quantity: 5
Available
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
zł123.16
24h
Available quantity: 1
Available
Sensor for detecting the distance, intensity and frequency of lightning within a radius of 40 km. The module enables weather enthusiasts to measure local storm data. SparkFun SEN-15441
zł135.85
3 weeks
No product available!
Module with light sensor (photoresistor). An analog output was led out on the XH2.54 connector
zł7.55
24h
Available quantity: 5
Available
Color sensor equipped with the OPT4048 sensor from Texas Instruments. It allows you to determine the characteristics of ambient light by measuring parameters such as light intensity, color in the CIE XY, LUV coordinate systems, as well as color temperature. The module is equipped with Qwiic connectors. SparkFun SEN-22638
zł70.39
3 weeks
No product available!
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)