RFM95PW-868S2 - LoRa 868MHz module

Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648

A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF-B

Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23004

Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653

A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201

IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934

LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 410 to 525 MHz. Waveshare RP2040-LoRa-LF

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2

LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117

A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT

IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091

At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179

Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078

IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939